Search results

  1. A

    quick question about boosting a 7m-ge

    It should, but you do know there is more to it then just the manifold. Read the stickie on doing NA-T, a lot of good info.
  2. A

    help on one person brake bleed

    Sounds like it's way past due to be changed. Just bleed each brake until you see clean fluid comming out. I'd do it again in a few 100 miles.
  3. A

    ebay long block?

    Looks like a pretty nice shop. I think it would take you a little more than $500 to rebuild. If you just want to just swap in new bearings, rings, new oil pump, yes about that for the basic parts, but what about machining, valve job, etc. ? BTW the site mentions that that motor is for a...
  4. A

    rough idle rocking the car?

    Only tool you need is a paper clip :-) Did you read the TSRM?
  5. A

    Boost/Vacuum gauge on N/A?

    I believe if that one isn't capped off you will have a vacume leak. I'd cap it anyhow.
  6. A

    Car blows white smoke out of intake

    11 ECU(+B) Diagnosis Momentary interruption in power supply to ECU. Trouble Area Ignition switch circuit Ignition switch Main relay circuit Main relay ECU
  7. A

    Supra just stalls for no reason

    http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx
  8. A

    sputter hesitation.

    I have both, used but in good shape, want a package deal :)
  9. A

    building up a blown 7mge n/a

    You just can't drop in a JDM always. I wish from the start I would have just rebuilt my original motor, long story short, not a very pleasant time with the JDM route and ending up rebuilding the original motor.
  10. A

    building up a blown 7mge n/a

    I've driven both and as far as handling stock vs stock the Supra will run rings around the Mustang.
  11. A

    building up a blown 7mge n/a

    There are a few that think is't not a waste of time and money, $6k for a stock rebuild is way out of line. I have less than that in my motor with everything being replaced with top of the line parts.
  12. A

    sputter hesitation.

    No that's not normal. Is that a new rotor? Can't tell if it is the rotor with the play or the distributor. Does the distributor shaft have the play or just the rotor?
  13. A

    Car blows white smoke out of intake

    http://cygnusx1.net/supra/techtips.aspx
  14. A

    sparkplug removal??

    You may have to readjust the gap on the plugs, check them.
  15. A

    sputter hesitation.

    Video won't play.
  16. A

    Strange things found while working on Supras.

    Mice in the spark plug galley, red cardinal behind the grill, don't know how he got mostly thru the grill and his ass was sticking out, must have been a head on collision. :)
  17. A

    sparkplug removal??

    Just easier to not worry about getting everything back in place to leave it connected to the lines and move it off to the side. The stock TB gasket is mostly metal with a rubber sealing gasket, mine is the original one and I've never broke it and it still seals.
  18. A

    Car blows white smoke out of intake

    You also have to use a jumper wire. Would help if you read some of this http://cygnusx1.net/Supra/Library/TSRM/MK3
  19. A

    blowing white smoke help

    Don't ignore what Shaeff suggested, I'd check those things before the turbo.
  20. A

    problem on a 89 supra n/a

    That was my next question, seems a lot of people forget about the jumper wire. If your timing is retarded that far to fire up the manifold it may not go past 4k, if you keep running it that way you'll have more to worry about then what you have now:) CRE, nice to see you;)
Top Bottom