Search results

Here's a link.. See the round rubber piece goes through the springs.. :nuts: http://gallery.sanitylapse.com/v/supra/displayimage.php?album=120&pos=20

If that spring is not on backwards then that mount must be wrong. That spring should not be sitting on the rubber. The spring should slide up to the top. At least it does on mine and Vals.. I will look on my NA and see what it looks like..

I'm down wit the JDM Horsepower!!!:runaway:

Scotty check that one with the rubber.. It looks like the spring is upside down.. I think on Mine and Val's the spring went over that rubber piece. The spring should have a flat side and that goes on top.. Just didn't remember from looking at it last night..

It will stay there. That spring helps hold it in place..

WHEW.... Didn't have to pull the tranny.. I was able to get it done through the dust cover... My guess would be that when I did the R154 conversion the proper bolts were not used for the hook. I bought the right bolts from Toyota and added a little threadlocker on it.. Used valvoline...

There is a hook that the fork clips into..

What would cause this?? I have the ACT HD pressure plate.. Don't know if that's the cause or maybe 1 bolt backed out and the other sheared from stress... ??? Ohh well.. It's going on stands tomorrow and hopefully back on the road Monday morning..

I notice driving home the other day I pushed in my clutch and felt the pedal give a little.. Hmmm maybe air in the lines??? So I call a fellow Supra owner and volunteers to come by after work and help me bleed the clutch.. Well the pedal felt like it was scraping something when I pushed it...

Yellow is right.. There is a tranny ecu behind the passenger kick plate. I did a auto to manual swap and most likely have those parts you need. I know I have the ECM and pretty sure about the throttle stuff as well. This was pulled from my 89T.. Might have missed in your other post but did you...

What color is the smoke. White I'm thinking.. I had this problem due to bad valve stem seals. That's just my thought.. however if you let the car run for a couple of minutes and then turn it off and start back up will it happen? Have you checked your plugs?

What time do you plan on starting?? Maybe I can come by...

I will look for those spacers tonight... I told you that thing was loud... Even after you put the DP on.. You will see....:biglaugh: