Search results

repin all the sensors are the same for the entire MKIII line up (87-92). What changes is the plug and a couple of pins position. (everyone so afraid of wiring)

ps if you are feeling giddy. As long as you can source a complete harness from what ever year, and have the appropiate plugs for the year ECU (87-88 or 89-92), than you can repin the plugs. It is actually easy to do just make sure to do all x-reference on the plug side for the appropiate year. :)

no way to test it unless by trial and error (Marlin Crawler) or running the entire transmission under a finite analysis program. :)

Super.Secret there is an out. The legal way of you to have that motor in that car is if you also have ALL the OEM electronics for the EFI system installed. That means that you will have to source ECU at the very least. OBDII plug on the drivers side needs to be retrofitted. All emission...

ummm SS hose for the power steering? Considering that the supra nominal pressure = 1250 psi which happens to coincide with Aeroquips MAX pressure handling capabilities (not burst as that is up in the 3k range). I would be careful! The correct line to use is the power steering specific hose...

awwww... :(

well keep in mind. The toyota NipponDenso injectors use a 11mm top feed Most Bosch and Domestic injectors are 14mm top feed. Lucas = the old name for Delphi before the split off from GM (also known as Rochestor).

told you Usain Bolt was a Monster! Another MASACARE in the 200m administered by Bolt again!

my my. Someone ate a sour bowl or two of stale cheerios today. I suggest you look my previous history up. I have no ego. I have and will call incomplete statements, ignorant statements etc. Symantecs, no such thing. Typing leaves zero room for interpretation so when I come in and post...

Ahh someone's feeling are hurt! Shame too as this was a nice thread too! FYI Incase you missed it, this is the technical section where you either post facts and items to support facts and not hyperboles & answers or you just mosey right along to other less technical parts of this forum...

and you are not telling me anything I don't know. ;) BTW you forgot one thing on that nice graph. That is only HALF of the turbo equation. That particular half is the compressor section but where is the turbine section along with the associated A/R? Also you are making a terrible...

The number 24 comes to mind... I will have to check. A bit thick? more like they ARE thick :) I mounted it on the passenger side and removed the fog lights (since the stock stuff is all gone from an electrical standpoint). I am trying to see where it can get some better flow without getting...

dirtyjz you will not break that thrust washer unless you are doing the following. Cutting sub 1.7 seconds 60 foot(18.2 meters) times and have an anti-lag system to help in achieving those. Even if you transmission has 225,000 miles (362102 km) on it ;) In any other form, the r154 will...

That is the issue without a doubt. Spec does not sell it with a throttle stop. Hell Not even tilton in the $4.5k Triple Carbon setup sells throttle stop for their setup!

***and this I got to see*** why pray tell is it :thumbsdow to powder coat the stainless steel muffler? Because YOU do not like it? Do not get confused with what you don't like to what is generally not liked or to what the op likes. Powder coating is fine and can take a licking. Ceramic...

I have been running Mocal oil cooler for quite some time. -10AN fittings in and out. The Nascar "recyclers" out on ebay sell them for pretty cheap which is were I sourced mine. :)

Full of oil and RK happening. Not even on the crappy 7m oiling system is that going to happen. low oil condition is the primary reason RK happens. All it takes is ONE time and from there it is only a matter of time before it dies.

...and I used to own one before I sold it off and bought something else. You know actualy experience. ;) That was right around the time that Blitz actually introduced that exhaust. Same complaints from numerous other folks, and they all had high HP until they got out of this game. ;) funny...

hey I went to uni from 6pm to 10pm, 4 days a week ;) But I also worked full time from 8am-5pm. Did that for 5 years. If the multi-million dollar basket ball players can get out of high school with a diploma and alot of them go to uni AND play baskset ball and still manage to pass. This little...

no he dropped out of school As for home schooling. According to him in the KDWB interview. He wakes up at 1pm in the afternoon. When exactly is this home schooling at? As for you, how about you type correctly. "made since"? You mean made sense right? ;) As for drop outs. I don't think...