chrome sawblades?????

[kwnate]

Holy cow!! I guess you can polish a turd

 

[CFSapper]

Holy cow!! I guess you can polish a turd

yah on my build thread

 

[da89soup]

My polished turds!!!!:icon_razz

 

[fiyota]

yea, i want to kno the process of getting them bladez to look that nice too. So there IS a difference in POLISHED blades and CRHOME right? For the CHROME ones do i have to get them sprayed? I would love to know more about it. Doing this mod until enough money is saved for new rims.^_^

You cannot spray on chrome like that, you have to have the wheels electroplated...

 

[johnathan1]

Here are my polished saws:

I LOVE THEM!

 

[akito]

thanks foto. So wat is the best HOME-MADE way of getting those looking nice as they could?

 

[ValgeKotkas]

http://www.englishcustompolishing.com/usca/aluminum1.html ?

 

[gtsfirefighter]

I found this. Maybe it will help.

http://www.supras.com/06/techcenter/... cc25e05a713b2

 

[akito]

thanks a lot guys!

 

[Boost Lee]

they're just sanded-down and polished stockers...

sawblades only came in white, gray and black...


EDIT: like this, right?

Direct me to the factory Black Sawblades?

-Jeff

 

[RazoE]

Direct me to the factory Black Sawblades?

-Jeff

Turbo A's had stock black sawblades..

 

[mk3ftMFw]

black is yuck IMO, im gonna polish mine..

 

[Stanzaspeed]

im not a fan of polished sawblades. just my opinion though :icon_bigg

 

[starscream5000]

I dislike sawblades period, but you know what? I'm still rocking them on my supe .

 

[gtsfirefighter]

I've stripped my blades but still have some "stuff" on them I can't seem to get off. I don't know if it's primer or what. It's nowhere near as bad now as it is in the picture I've attached. I was able to get most of it with more applications of stripper but there is still some on it and no matter how much I scrub and reapply stripper it's still there. Does someone know what this is and tell me how to remedy it?

 

[PROJECT N00b]

how would i go about getting my blades in black? what kind of paint?

 

[Back2Basics]

I havent done this to my saw blades yet, but I plan to this summer. You just need to buy a can or two of aerosol aircraft paint remover. Spray it on, let it sit for only a couple minutes max, then hose off. Those are instructions that I got from someone on here and his look great. I used the paint remover on my IC (someone had painted it white) and it took the paint right off back to the original brushed aluminum finish.

 

[PROJECT N00b]

^^^now...is this a reply to my post?

 

[Dirgle]

Even though it is not a very good image, this is my chrome stockers. They came from the factory chrome with maroon accents.

 

[CFSapper]

look at my build thread on how to do it johnathan has one to

just spray the stuff on and wait then wash it off with a hose the take a really fine grit sand paper and just start wet sanding then clean it off sand clean sand clean till it look really shiny the poilish it