Search results

Correct, i do not use the cruise control switch. I guess i'll use that,

Ok, i have the holes cut and gauges mounted, where is the best place to tap into for power? I've been looking for a wiring diagram of the cluster and i was thinking of tapping into the cluster, but i dont know what would be a good source with out a diagram. I have a new water temp, boost, and...

If your doing it and have no experience then anything you use will be "back yard" job...

When i did my rear upper arms, i just turned the control arm so it faced outward then used a ball joint press to press them out, it was ez as pie...

Single PC or OEM Bearing....

Is it the failure box that is causing the tail light issue? Its not hard to fix the tail light harness by the way. Also heater core isn't too bad a whole dash swap + heater core in a few man hours if your quick. These issues y ou will always have with other mKIIIs so fix it and keep it moving

Hello, i picked up an AEM unit and after my tune i want to build my fuel system up a bit. I currently have a walbro intank using stock lines and 550cc injectors. I would like to run one in tank and one external with a surge tank and 1k injectors. I have come across two tanks that are very...

Do more tests to it before jumping on it. It does look good but if the engines bad in any way get it cheaper

I'm running a strong 7M starter on my jz and before that the weaker smaller 1j starter couldn't hack it n broke. Put a used 7m starter in there and its been working for 3 years... only 10 bucks and i have two spares

i <3 the sound of my 1.5jz lol So smooth and throaty til redline lol... the jz will inception you with its sound. 1 yr from now after some more miles you will be singing a new tune..

fuel pump doesn't click, the fuel pump relay clicks you should hear the pump "prime" turn on for a brief moment to build the pressure. Then it goes quiet. When you crank the pump starts to pump again to keep the car running at the preset pressure.

nice thought i was the only one with that color valve cover

Also, continue to make payments but make sure you mark on the check (payment from :your name) that way they know you are paying your half still.

FYI, he was suppose to notify the company (NOT YOU) that he could not afford it and has to move. this will break his portion of the contract (lease) and they can sue for the balance of the lease or come to an agreement (IE: find roommate) but it would put more fire under his ass to do because...

get a new shifter plate.

You have to pass visual as well as emissions so there's a lot that has to be done like make it all stock.. i could be wrong though im not from nazi emission land.

Long story short, after trying out MANY rebuilt units from advance, autozone, other parts stores, they ALL did the same thing. The rear seal, i got a used 91 master cylinder and problem was fixed immediately. I'd look into a used working one or buy new from toyota.

... thats it? WoW yea i need to get the AC working in my car... that 1-wire plug would be the EA12 connector wire correct? Do you know where into the A/C Pump

Anyone have detailed info on what to hook up for the AC to work (wiring wise)

Why not just do an air bag system. You'll drop the car on the frame for shows and raise it when you drive away.