Search results

I weighed the sound deadening in my 1986 supra hardtop supposed to be the year with the least deadening and the lightest mkiii. The total was ~56lbs this was the material in front floor/rear floor boards under front rear seats from trunk are and wheel wells in rear arounds the tunnel. If...

I am still curious to the end result. maybe jaws gear could update our tranny internals and swap shafts and parts on the rebuild with the core.

Have any one verified the difference between the R154 in the saturn sky or pontiac solstice vs the supra one R154? Whats difference? I heard the new R154 haves better syncos and a stronger fork & thrust bearing. The bell housing and tail sections of the transmission is different I tried to...

If you want to peak a 1jz go with a standalone such as the plug and play stinger its afordable as well. Most people will not run a engine at peek boost hp all the time because you dont want to boost more then 15-17psi on pump gas depending on tune/managment. Race fuel or meth I have heard...

Heavy duty pressure plates + puc disc + NSW will kill your crank thrust washer and add more on off (SHOCK FORCE) to your tranny! If you have enough torque it will kill your R154 on the drag strip with LSD & drags for sure. Ideal clutch is multiplate with NSW bypassed better for drifting and...

I think the best daily wheel HP is 2 X the OEM crank HP so if you have the 7MGTE no more then 460. 1JZGTE ideal daily 560 2JZGTE ideal daily 640 Other things to calculate how much you put your foot into it budget supporting upgrades like brakes what the point of having a 900hp supra if...

Cool work, ISC provision for it so it could idle? What is volume of the plenum? Is it proper for the 3ltr displacement?

The 4.1 tends to blow up at the drag strip with enough HP also you need to change the half shafts for U.S models so when you pay 5-600 + shipping on cheap bay you better hope to get the halfshatfs, then baby it on the drag.

I feel bad for you. I use a Palm Treo window Mobil based comes with a very easy to use PDF reader called.. PICSEL PDF VIEWER (TM) Version 1.1.0 It opens TSRMs with no problem. Zoom and page flipping is a snap also. Maybe they built their software for other OS like palm or mac touch I...

Why compound turbos though when you could kick out 1 of the turbos and use a supercharger! 1 supercharger induces torque & power in the lower rpms then turns off via a magnet clutch like the ones on an A/C pully. Then have only the large turbo run when the rpms or load is at a certain...

Remember there was a group of people having issues starting their supra and there was several ideas on how to fix it including even adding relays. I told most people to remove the relays and wire it streight to the ignition or use a push button starter setup. I found the "UK 1986-1988 supra...

Thank you for the host. I find it much easier to use my pda phone to read manuels and work on cars. Dont have to worry about tearing pages and finger prints clear off the phone easier. My favorite pages on this is the electrical wire routing pages 119pg that you could not find on any of the...

Here it is at last complete 1987 supra EWD pretty much cleaned up 200dpi hi res scan total size is around ~80mb find it here.. http://www.4shared.com/file/88260888/bb69d08e/1987_TOYOTA_SUPRA_EWD.html Someone with tech pages should set up a more perminant host for this though!

No you dont need to swap them everything is the same! the junction boxes are the same a little bit more kenji on them thats it! I looked up all the internal connections in the J boxes they are all the same! It is better though based on year say your car is a 1986.5 and you have a half clip...

No EWD is in there.

I know alot of people are running into issues with swapping and wiring with pre89 supra electrical. Since I noticed there is no pre 1989 EWD I took the liberaty to scan and share one with the supra comunity as soon as i do some file triming cleaning up i will export it to PDF and share it...

The yellow green goes to the solid yellow wire.

Yes the yellow green wire is your alternator wire that one is by the fuse block that is 1 wire you must splice. The thick black wires you must splice come from the alternator from the 1JZ you must not really splice them but extend them to the lug they goto the short thick wires that go into...

Thats is because your headlight / tailight wires go through your engine harness its not part of the chassie harness Hey you dont need to extend the harness it is mostly plug and play if you do it right I had to splice or extend no more then 20 wires. All you need to do is use the EA2...

The only body parts that would blend well together is the taillights. I saw a mkiii with mkiv tailights molded into the 3 piece lights driving on the 15 next to corona ca. I didnt have a camra on me but it was sexy.