Search results

the best way to do a budget build is to shop smart and shop used. cutting corners will come back to bite.

starter not fix it? before you said the starter tested bad, i thought the neutral safety switch was bad.

yeah i wish i had my camcorder there instead of just the digi camera. little did i know you couldnt zoom in video mode.

matt- please add 88ttargajason to the dyno list. doesnt look like supraguru is going to dyno, so take him off the list. also add boosted17 to the attendance list. thanks

electric sliding roof is rare. i believe those were 91-92 only, which are the most rare years too. well, aside from the 93, but those werent imported. a lot of the sunroofs (non elec slide) were dealer installed options. im sure jeff will be in here to correct me if im wrong. and im...

if you dont have an auto you need not worry with the ECT wire. the ect wire is an input to SP2 at the ect ecu.

http://www.fullthrottletech.com/attachment.php?attachmentid=215&d=1142261716 good luck matt!

your profile lists the mkii. what trans do you have in the mkiii?

whats wrong w/ it?

jeff- he uses a digi cam and can email it to you, upload to youtube, or both. its your choice. matt- yes you will. i can help you with how to do it.

ok, here is how the price breaks down. tony is cutting us a pretty good deal. hookup and 1st run is $35. then you can do as many more as you want for $15 per. so people that really just wanted to do a single baseline pull, its super cheap. it also allows others to do as many runs as that...

do you have tunerpro installed on your laptop? matt- i think the list is pretty well set. i havent heard from anyone else that might be able to come. i talked to tony yesterday. he said he bought a video system to install. since there will be quite a bit of people he has it set up so...

mike- do you have a laptop pc? i can email you a base map that i use and you can upload it to the unit. 15-16:1 i wouldnt be too concerned with. the ecu is still trying to relearn all the setting ant it will take a bit. do you have just the basic setup on it right now? (how the...

mine isnt welded. its just drilled and has a bulkhead fitting like i showed above. good luck with the drain. you'll be the first ive seen that doesnt leak without welding.

yep! its tony. pretty cool guy. ive been going out there for the past year or so. i think he still works at toyota. mike- yeah ive been doing some maftpro tuning. let me know when you want to tune, or i could do it at the dyno while at the meet. its ~100 miles from your house.

fuel drain will not work. have friends that have tried it. it just will not seal properly. i supose you could weld the fitting in if you were die hard about using it. if it were me (and how mine is done) drill and tap the bottom of the tank inside the stock baffle. run that to the pump...

good to hear jeff! sorry to hear armando :( i hope this isnt like other supra meets were things start falling apart at the last min. still, with over 30 people signed up even if half show up it should be a good time! now lets just start hoping for good weather!

congrats again andy! i think with the ccw's it may have hit 11.5's even. still a few more weekends before season close :) i uploaded the vids and sent you the links in aim. lemme know if you didnt get it.

i agree. with a 5sp it will be harder to do, but still doable. hell bryan ran a mid 10 with an ancient t61.

you really think 95% of the people on here will buy $100+ adapter clips? i went down that road, and couldnt sell a single set. i sell the $30 standard clips all day long.