Search results

Here is a 165amp from ebay http://cgi.ebay.com/ebaymotors/88-92-TOYOTA-SUPRA-HIGH-OUTPUT-165AMPS-ALTERNATOR-7M-_W0QQcmdZViewItemQQhashZitem255a40ac33QQitemZ160427977779QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

That is a picture of your CPS and you prolly can get a cover for it in the for sale section. Just ask people that are parting out there car.

What they mean by the passenger side is the complete passenger area. I think that is what you were talking about. I bought both passenger and cargo area carpet on ebay and the were great. You will have to cut out the the area where the bolts must go but other then that they are good. I also...

That would work to

Do you have replacement intake pipe for the accordin hose. If so just take the filter off and cover the end with a piece off strong plastic and clamp. Insert a hose with pressure gauge through the plastic and begin to pressurize. It will work for what you are trying to do. I did the same thing...

One thing to think about is when you are sitting at idle there is no positive pressure in the system but as soon as you start to boost you are now in positive pressure and this when the leaks will begin to expose themselves. However, you will be in the car and will not be able to locate them. I...

Well I can tell you when I first purchased my 88 I went through and checked for leaks and cracks on the intercooler piping, couplers, vacuum lines you name it an I thought that I did everything but the car was still sitting at like -16 at idle. Then I took it over to a friend house and did a...

-14 still seems to me kinda low. My car would sit and idle at -20.8 which is a little on the high side, but I would expect at least -18 to -19. You must have a vacuum leak somewhere. You might want to do a pressure test on it and see if you can find any leaks.

Is your vacuum running at -14 at idle?

Well the price is about $400 difference. I have a map-ecu on my car it works great but not to many people use them in comparison to other piggy back systems so it is hard to find people that are familiar with them. The Map-Ecu2 monitors knock and few other perks. In my opinion if you are willing...

I am no expert but I have had my share of problems with fuel cut. If you are trying to run more boost I would just look to get a set of 550cc injectors, but if you are happy with what you got then just get a stock afm and check for boost leaks. Also check for any codes. One other thing to...

It sounds like that you are looking for a turbo gauge cluster anyway. So I would say get a new gauge cluster and hook it up. If it still doesn't work then it could be the wiring. I'm not sure but I think that there are fuses that control it as well. So you may want to check there to.

Yeah good point Rich. Don't jinks your friend. Just because he is spending a lot of money doesn't mean something can't go wrong. Plus he is spending a lot of money on parts. The important part is making sure the person that is putting this motor together has a ton of experience with working on...

Some of these things he may already have or might be some what obvious things you will need but based off what you have listed here you go. FMIC by Driftmotion, CX Racing depending on what you want to spend. Aaron at Driftmotion says that the IC he sales can support 750hp. I will most likely...

Here is one by Beech Performance http://store.driftmotion.com/static/i-bpm-202-07.php

Also a lot of these ebay gasket kits will have most of your main gaskets but will be missing a lot of the small gaskets that will not come to mind until you realize that it needs a gasket. So once you start nickel and dimen here and there it ends up being worth it to just go with an OEM gasket...

As they say you get what you pay for. It depends on what your goals are for the build and as nugget said it depends on the brand. I was just in the same situation with my rebuild. I had to decide if I wanted to pinch off a little funds and go with a off brand or if I wanted the best quality...

Thats what I thought. I well go ahead and tell him to angle it then. Thanks Grim

Hey guys getting ready to have Seth start on a long runner ffim for me and trying to figure out if I want it angled or straight forward. I like the idea of not having to relocate the battery but it does seem that if it is angled I will have a little more room in there and a little bit of the...

What about Adrenaline's Probe style adjustable temp fan control switch kit that they sale?