Search results

moe the guy at the gas station must of thought i was on crack.i was shaking with anticipation while he was putting gas in my jug:)i wish you luck and i keep checking your thread for new's maybe a red "X" on the 2.5 ;) a few thing's to look at soon.sound's like my throwout bearing make's...

well i finished hooking up all the vacume line's.put the gas tank in place,wired a couple of relay's and some power wire's to the fuel pump's. cranked the motor to get some oil flowing,think it might have taken a while to get oil pressure because of the oil cooler. i then installed the fuse's...

nice to hear she run's:)

the single stage chrome is probably the nicest,but still has that ceramic coated look.i wish i had some good pic's of thing's i've done

i ended up buying some rust remover stuff from home depot and poured it into a 5 gallon bucket.i submerged the hub's into the stuff and left them soak for a long time.they came out nice and clean like fresh cast piece's.this was alot easier then doing it with my sandblaster because the rust was...

i say upgrade to pimp status;)

^^^ i'm most likely doing that.not really a big fan of the pump on a switch method,unless it was on the trigger wire to kill both pump's.

i'm getting ready to start wiring my pump's.i plan on running seperate relay's for each pump and there own power feed from the battery.i'll also use the stock power wire to trigger the relay's. the only thing i'm not sure on is wire and relay size,because the thread's i've read made no mention...

mustang's have a different suspension then a supra.if you look at the diagram's posted you can see the differance between the two

good stuff man,enjoy:)

i used a b&m oil cooler because it use's an-10 line's.i just couldn't find any factory junk yard available's one's with bigger then 3/8" line's.i did squeeze it in the same spot and the hole in the greddy bumper has a bigger hole for air.i have no a/c and still didn't want it mounted between the...

thanks chamber's,i'll be happy if she purr's like a kitten.;)

i now have my diff and driveshaft bolted back in.i filled the r154 with some redline mt90 and bolted up the v2 shifter w/momo knob. i wired up the boost controller kit for the power fc and ran some an-4 line's for the vacuume to the tial wastegate.i need to get a couple more fitting's to finish...

congrats on the award's.does a hood fit with that turbo on there?just curious.

i never heard anybody call any part of a supra exhaust an "up pipe".you must be a subbie guy.

thanks,i'm at the nickel and dime me to death part;).

today i mounted my dp,which took all of about 2 minute's.i also mounted the odyssey pc925mjt under the ic pipe where the battery tray once was.i used some angle iron to hold the battery from sliding side to side.i used the factory hold down bracket to keep it held down tight.

picked up my 7mgte lower radiator hose today.once i seen the hose,i was like no way.took it home and it isn't anything like the 1jz lower,but fit's pretty good after trimming about 5-6" from the part that goes to the radiator.bolted in the radiator,poured my $17 a gallon toyota red in(shit was...

your's might be running before mine;)

got a few more thing's done.i finished installing the chassis harness.put my front bumper back together.looked through all the moulded heater hose's at the part's store and found 2 that worked out decent.also ordered a lower hose,which should be here tommorow.i'll be going by toyota for some...