Search results

  1. E

    3D Printed Supra Parts

    very cool. An idea I had years ago was a switch panel to replace the flip open ashtray in the center console. I made one out of acrylic, bent into shape, turned out ok (I had mine hooked up to lock TEMS in full hard mode). A 3D printed one with openings for multiple switches/buttons could be...
  2. E

    Interesting "Now it won't start" situation

    Yup, I've had similar issues that turned out to be the CPS. If wiggling the wires fixes it, take the CPS out and rebuild it. You can get a rebuild kit with all of the hardware (seals, bearing, etc), and you can get a new connector with wire leads. rebuild kit...
  3. E

    The Small Questions Thread

    Drive with the hatch open?
  4. E

    Request - crank timing pulley measurement

    Do you guys know the Vpp of the stock VR sensors? Adam, how did you come upon the 50 Vpp in the sensor you have?
  5. E

    CT26 max pressure

    I've read that the maximum you should run a stock ct26 at is 15psi. Above that, the turbo is way out of its efficiency range and you don't see additional power gains.
  6. E

    What fuel pump or pumps should i get for a 1000BHP+ setup.

    Something like this could work: http://www.radiumauto.com/Dual-External-Pump-Fuel-Surge-Tanks-P526.aspx
  7. E

    Chunks' Build

    looks great with that fat rear tire
  8. E

    Request - crank timing pulley measurement

    thanks limbodk for posting all this info. Is that sensor compatible/comparable to the stock VR sensor? I don't know enough about them, what would I be looking for in terms of sensor specs? Curious if it would work with the AEM v1 I searched that sensor, so thats from an IS200 (90919-05023)? I...
  9. E

    1300 Kg Track SUPRA project

    Looks great! It's nice to see a car that actually takes advantage of the diffuser
  10. E

    1300 Kg Track SUPRA project

    awesome. any pictures of the new modifications?
  11. E

    Request - crank timing pulley measurement

    if you can't use the CPS, best bet is probably a steel pin in the cam gear like NegativeGeForce did: http://www.supramania.com/forums/showthread.php?183939-Ridiculous-1000HP-7M-Street-MK3-Build/page33
  12. E

    Chunks' Build

    nice build, and very good times. about the injectors/fuel rail - why did you adjust the positon of the rail, rather than machine new injector ends/bosses? I thought the blue part of the injector came off, so they just have a different one for different cars, using the same core injector? not...
  13. E

    Charcoal canister update

    So why not treat it as a standard fuel cell vent? rollover valve with an mini air filter?
  14. E

    88 ecu schematics

    What do you need help with, for the wiring? Did you see this thread? http://www.supramania.com/forums/showthread.php?186952-ecu-master-digital-tuner-3-on-7MGTE
  15. E

    Charcoal canister update

    you could toss the charcoal canister in the trash, plug the line, and use a vented gas cap. but that's probably illegal.
  16. E

    CPS Repair

    booo, should have bought the billet aluminum cover from Arizona Performance. good luck getting it running, remember that when you install the CPS, it will usually turn one tooth when it engages with the cam
  17. E

    Supra Dynasty The Saving, Death & Resurrection of My A70 (V-Mount)

    Cool, looking forward to more updates.
  18. E

    AR5 transmission

    http://www.supramania.com/forums/showthread.php?25024-AR5-Trans-Take-Two-The-Solstice-Solution
  19. E

    Advise on repairing a floor pan

    Yes, I'm a member. Make sure you switch your profile photo to one of your supra. I got approved within a day.
  20. E

    Advise on repairing a floor pan

    If you join the MK3 buy/sell/trade group on facebook, there are a few people parting out cars. You could ask them to cut the panel out before they scrap the car.
Top Bottom