Search results

heres mine

Hey, well i haven't been to the meets before, other than pur automotive , but wasn't driving my car. the bolts were....jst hard to find, it wasn't the right length so i jst went to toyota and got them. i hope to see your car sometime as well or maybe at the meets if you go there. im more up...

WhtMa71: Thanks, im still looking for cams vs a bigger turbo, maybe ill go for both, who knows till i finish most of the build. Guyana00: i havent been to the meets yet, been busy fixing my car. 92nsx: i have seen smaller cams, was regrinds 254? or something by ted or toda, (Something...

apparently i have decided to go a separate plan to reach my 400hp goal. Spearco Intercooler or similiar BC 264 or similiar underdrive crank pulley Lightweight powersteeling, alternator pulley Lightweight flywheel and maybe a 57trim turbo

apparently for the past couple months i have been looking for bolts to put the engine on a engine stand, which was impossible to find at (lowes, home depot, rona) until i decided to get bolts from Toyota and now they fit. i also got some parts in the mail 3" vibrant Flex pipe 3" catco cat and a...

try taking off the pos and neg cable terminals and put them back on. it happened to me before when i went to start it all lights went off *i dont know if u did take off the pos/neg while installing a safc, if you didnt ignore this post*

yea, crappy pics, were taken with my cell. currently i got my block milled, hot tanked, bore and honed .50 over. cost me about 160. i will get back the block later this week here are a couple pics of my car as it stands now. My Engine bay as it stands now (but without cruise control no...

so i finally got some parts for my rebuild engine. new NPR pistons .50 over and i acquired a MINE's ecu for the 7mgte too.

or does anyone know which fuses are suppose to be on?

i know the procedures to find a drain, but i mean im just finding it the easy way first. thanks poodles. does anyone know if the fog fuse is suppose to be on without the key?

currently i have a Optima battery and i tested it one day it shows 1000cca out of 800, then the next day i test it it says bad battery and shows 275/800 so i know its draining overnight or something. i just checked my fuses without the key in the ignition at the driver foot rest area, and these...

does that mean i have to take off the cluster to put it through?

hey , i need some help wiring my gauges so that they reach to the engine bay. i have searched and couldn't find an answer. i have a GReddy boost gauge and fuel pressure, i was just wondering, how do you wire it out to the engine bay. i have a lotec pillar and i don't have enough wires to pull...

i did not paint the taillights i got the tint from http://www.spalshield.com/shop it was called gunsmoke, which was lighter than the "smoke" color, and was the last one. also, i havent gotten the front bumper painted yet as i just got the car out last week. some of the new stuff that has been...

like if i leave the car in the garage overnight, the next morning it starts fine,its about 18-19c, but when it warms up and i leave it sitting for about 5-6 hours after i try to start it it hesitates and the rpms just rise slowly.

i have a 91 supra, and when i start it after it cools down it gets hard to crank sometimes. i need to crank the key for about 3-4 seconds and the rpm gauge rises to idle, but when i start it in between short times, it starts fine, it has a optima battery which i tested and its good. 1000CA...

so, i havent been updating this thread in a while, lately i had some problems with the clutch master and slave, so i ordered brand new from the dealer. i also got a new 3" amsoil intake,TLS performance, gunsmoke tint, TSW rims, euro turners and jdm rain guards i dont have any pics of the TSW...

2254517. installed them on at sti yesterday. pretty lightweight. was on a 2004 subaru. if its the 18's its +50 offset

mine pings as well, i thought it was a ball joint or something, but read up that it was the motor mounts, can they make the ping sound? happens when i go slowly to the left only.

i was thinking of getting one too...but wasnt sure if it was universal...