Wheel Fitment & Question Thread
- Thread starter BorHor
- Start date
Thanks and id rather not go lower, I would like to retain the lip which almost gets ripped of in certain areas.
These pics were taken yesterday: (click to enlarge)
These pics were taken yesterday: (click to enlarge)
Last edited:
SICK I love the Gold those wheels are IT.
great fitment. What is the offset your running. I am on 19x 8.5 +35 an 19x 9.5 +32
great fitment. What is the offset your running. I am on 19x 8.5 +35 an 19x 9.5 +32
HIDPLANET;1539905 said:Thanks and id rather not go lower, I would like to retain the lip which almost gets ripped of in certain areas.
These pics were taken yesterday:
With the spacers the specs are FRONT 18x10+15 and REAR 18x10+14
Without the spacers FRONT 18x10+30 and REAR 18x10+24
Without the spacers FRONT 18x10+30 and REAR 18x10+24
I am scurred! lol You havent seen the CHUNK off of my transmission that was gouged from the entrance to my drive way area.
yea sure they will fit but why put FWD wheels on a RWD car, the offsets will be high and the rims will be sunken in the fender wells. JMO
will a 18x10.5" +25 fit on the front in particular on the inner guards? guessing ud have to run a 235/245 minimum for this size.. happy to cut lips off/roll fenders etc but also like car being low so wouldnt want to be scrapign everywhere i go or risk damaging some killa rims. i know its a bit of an ask haha..
235s on a 10.5 is probably stretching them to the limit and could potentially break bead and lose air. I dont know this as a fact, but it seems pretty radical. Id shoot for 245 on a 105" wheel if possible.
How well would this size fit.
18x8.5 +48
18x9.5 +36
Would it clear the front suspension. Would I need a spacer so it wouldn't look so tucked in?
18x8.5 +48
18x9.5 +36
Would it clear the front suspension. Would I need a spacer so it wouldn't look so tucked in?
MmmTarga;1543994 said:
Those will be just fine, and your recommended tire sizes are as follows: (F) 225/45-17's, (R) 255/40-17's. You will definately need rolled fenders all the way around. I'm running 17x9 (15mm) and 17x9.5 (15mm) w/ 225/45's and 245/45's respectively, and rolled in front only. I'm getting away w/ the rear stock, only because I have the stiffest spring rate coilovers you can get! Harsh ass ride, but no rubbing. Her's a couple of photo's for ya.
