What did you do to your supra today? Pics

[Supraholics]

Lol thanks I tried doing a stand:



http://youtu.be/ayRIZHuuWs8

Sounds real nice actually. You had too much throttle. Try releasing the throttle for a sec or so and depressing again and it may only need 60-70% throttle.

 

[Albert]

Def have to try a bit more


Anything under that throttle the 295s hook and it bogs. Front breaks couldn't hold her back

 

[Bulkierzero]

Just some pics with my fresh paint out and about.

 

[DeMoN2318]

 

[Korg77]

"Before" and "after" (polished and with new bushes) pics? Or maybe this is whole new item?

 

[Dan_Gyoba]

Whole new item. They're both the same side. Nice.

 

[te72]

Anything under that throttle the 295s hook and it bogs. Front breaks couldn't hold her back

I had that problem at Clint's wedding that one time. You know what fixed it? I pushed the brake pedal harder and sooner.

Nice sounding though man...

Just some pics with my fresh paint out and about.

Digging the panda look.


Me? I most recently scraped 4" of snow off the top of it. On the plus side, all the snow seems to have washed off the top 1/2 of my car, from all the dust that's been in the garage since working on the Chevy...

 

[88SupraT]

Removed my whale tail today.... Going to get the wiper motor hole filled next year and possibly going to wingless.

 

[mcammarn]

got my clutch today. just looked at it.lol
waiting on more items to come so i can put motor back together and drop back in.

 

[Doat]

What clutch is that? Seems like a lot of people on here use that clutch

 

[mcammarn]

What clutch is that? Seems like a lot of people on here use that clutch

http://store.driftmotion.com/static/i-ts2-hdss.php
this is the clutch. i ordered it threw hpf though. got it a little cheaper and its closer to me,lol

 

[Doat]

http://store.driftmotion.com/static/i-ts2-hdss.php
this is the clutch. i ordered it threw hpf though. got it a little cheaper and its closer to me,lol

What are the pros and cons of that clutch?

 

[Dan_Gyoba]

What are the pros and cons of that clutch?

Pro: Holds 400+ ft-lbs torque, with stock-like engagement.

Con: ... Not sure. Not so good if you're well over 400 ft-lbs torque, I suppose.

 

[Doat]

Pro: Holds 400+ ft-lbs torque, with stock-like engagement.

Con: ... Not sure. Not so good if you're well over 400 ft-lbs torque, I suppose.

I am nowhere near 400ft lbs of torque lol but It's good to know about clutches and such in advance. Thanks.

Anyone have any recommendations for radio harness adapters and dash kits? Do those no cutting/soldering adapters work?

 

[Dan_Gyoba]

The Stereo no-solder wiring harness works great. I've used them in numerous vehicles, and have been very happy with them, including while competing in IASCA SQ competition. When I was more serious about it, I used to pull the wires out of them and put the connectors on the aftermarket stereo's wiring harness, so that there were no extra splices in the wires, but that's really going overboard.

 

[Doat]

lol thanks for the info I got a harness adapter and dash kit from walmart, I know the kit isn't great but it will do for the time being I just hate being forced to listen to the radio.

 

[DeMoN2318]

"Before" and "after" (polished and with new bushes) pics? Or maybe this is whole new item?

Whole new item. They're both the same side. Nice.

Not New...I took mine off and the ball joints were bad. So I picked up a set from a local junk yard with good (better) ball joints...cleaned and polished them, got new ball joint boots and installed new poly bushings.

 

[AbsoluteSpeed]

My car has been parked for a while but I did play with photoshop for a while today.

 

[OneJArpus]

After all the hard work got it started once again .... sat for a few months

 

[Numba1Stuna]

8t8soup and I went for a cruise in his Supra doing 60+ plus in town and got we red and blues on our ass, pulled us over lol. No arrest though thankfully...

Sent from my LG-P999 using Tapatalk 2