I tried driving my supra once in the winter.... Was stuck before I made it out of the driveway. No thanks.
funky_monkey58's build thread.
- Thread starter funky_monkey58
- Start date
- Status
funky_monkey58;1423333 said:
LOL, I had the same experience, stuck pulling out of a parking spot.
Tried that calibration, it won't start with it, not sure why...chat ya later dude.
I am thinking it has something to do with the ignition phasing, being that I made that start up cal file in AEM pro for the series 1. And you have the newer series 2 with sequential ignition.Flateric;1423361 said:
Could you send me the cal file for aem tuner that the car does start on?
I want to take a look at how aem is doing a few things.
It weighs under 1Kg Sean so about $30AUD, only ? mark will be the dimensions.
I'll ask my post guy tomorrow
I'll ask my post guy tomorrow
IJ.;1423384 said:
Sweet! Thanks again.
The Dealer was nice to me today. 15% off, I think it helps when you walk in and they know you by name.
hell even this morning sucked 33* and wet. those tires i have really suck coldfunky_monkey58;1423333 said:
I can do paypal or send you a money order which would you prefer? I have time.IJ.;1424095 said:
Some steps forward were made today.
My CF cooling panel arrived in the mail, as well as a couple bits of hardware from eagle that turned out to be the wrong bits, a phone call later and all is well! New care package was sent out with the correct parts.
As well I stopped by the paint store, and had some paint mixed up for the engine bay, roof, and hood. Should look trick being a shaved and tucked engine bay with base coat/clear coat paint!
This weekend I am going to focus on clearing out a spot for the supra all winter in my uncles garage. (it is heated there with better lighting)
And snow is in the forecast already.
My CF cooling panel arrived in the mail, as well as a couple bits of hardware from eagle that turned out to be the wrong bits, a phone call later and all is well! New care package was sent out with the correct parts.
As well I stopped by the paint store, and had some paint mixed up for the engine bay, roof, and hood. Should look trick being a shaved and tucked engine bay with base coat/clear coat paint!
This weekend I am going to focus on clearing out a spot for the supra all winter in my uncles garage. (it is heated there with better lighting)
And snow is in the forecast already.
Hey, just wanted to know how you got the I/C Piping, was it custom fab?
I have a 24x12x3 And i wanted to see how you did yours, as i am getting some material Saturday, only thing is, i dont have any mounting brackets for the I/C, what did you use to mount yours?
I have a 24x12x3 And i wanted to see how you did yours, as i am getting some material Saturday, only thing is, i dont have any mounting brackets for the I/C, what did you use to mount yours?
I built a bracket to mount up to the bottom of the intercooler and welded it in place.koldfire08;1424881 said:
The piping I figured out where I wanted it to run collected some tubing, made a couple pie cuts and welded it together.
Ordering up some extruded aluminum to make a fuel rail out of later on this evening.
I figure I might need to up the flow just a bit from the stock rail.
I figure I might need to up the flow just a bit from the stock rail.
Sean, can't wait to see this thing going. This build is inspiring me to get up off my lazy ass and work on my car. Haha
I think I'll try to get the engine in this weekend. After I get a hatch with glass, good black hood (black on red = sex), and passenger seat, all for under $100
I think I'll try to get the engine in this weekend. After I get a hatch with glass, good black hood (black on red = sex), and passenger seat, all for under $100
- Status