Search results

Nate, if I had a penny to give you for posting non-sense, you'd be rich by now. Go do something useful.

That plug is located on the wiring hanress, the snesor itself is located on the chassis though, its a 3 wire plug. You will need one though. I still need one as well.

The one I have pictured is for sale on Driftmotion for 125.00, I am not trying to advertise here, I do know that is against the rules, but that is where I got the picture from. If you need anymore help let me know. Curious, what swap are you doing a 1jz? 2jz? and what car did the motor...

Figgi, those sensor that have to be put on the crank and made, the ratio it has to have 62 teeth? Any pics'? threads?

Yup that is a map sensor you need. The 1Jz requires it, along with the JDM spec 2JZ's Here is a pic of what it is. Hope this helps.

There is a seal behind that. Also oil can leak From here if that seal has worn a grove into it. There shouldn't be any play, That is torqued down to about 146, around that spec.

Have you replaced any taillights lately? If so did you use the two prong ones. Some people make mistakes and will use a 1 prong one, many things including tems, headlights, running lights, can be screwed up. How many running lights work correctly?

I would stick with OEM, I guess a good brand of silicone is not a bad idea, I did get the cheap stuff, so that was my fault.

Just replace the hoses, I looked up the cost, and they should run for then 70.00 for all three.

I have seen that the stock twins on the 1st gen 1JZ's seem to go bad. I guess the PCV sucks in a lot of oil and then destroys the stockers on the car. If I did cap off the stock hole it comes through and relocate it down the tube farther, basically what the 2nd gen has or further would this be...

Bought a '87 Supra turbo manual targa. rebuilt motor 62-1 turbo, full blitz nur spec exhaust hks down pipe, tuned with a safc-II, RPS clutch, Gauges aem, full hard pipe intercooler pipes, nice intake, lexus afm, rc 550's. I paid 2300.00 . I torn the motor out and stripped it to re-do the...

Silicone, bad idea. Back when I am unintelligent, still say i am still :) I used silicone .. on my brake booster to manifold. it pinched and I lost braking power. I had to press so hard to stop.

XTD again is not a very good brand, you will run into problems, and I am sure ti was a 'good price' but sometimes spending the extra money saves you... If I were you I would pull it and inspect it, I am curious to see your findings.

Well now you have a little of an idea of what is the problem. I blew my head gasket, and you would think you would have more coolant in the cylinders, well like you, I had oil in the cylinders. I took a cue tip with an wood kabob stick and went to each cylinder. I had more oil in there, but also...

Codes: 34.) Turbo Pressure signal 43.) Starter Signal 51.) Air conditioner switch or neutral start switch signal 52.) Knock sensor signal The turbo that you had "rebuilt" is it a stock ct-26 or an upgraded one? An upgraded one with the stock wastegate will still make more power then a...

Hey poodles. I have great news After I struggled with the first side, I figured out what to do, and I timed myself on the exahust side. I did it in 4 minutes 48 seconds. :) I took a little flat head screw driver, and what do do is find the lip that goes over the valve guide. Then take a...

Ha.. well I mine as well keep doing what I am doing then, this sucks! :D

Well, I am working on my 1jz head, which is basically the same as the 7M head, at least for the valve seals. I cannot get these things off, i got 1, took me 5 minutes.. They don't slide off, does anyone have any suggestions... I don't wan tot spend 5 minutes or more per valve 24.. Thanks guys.

You want the hanress? Yes, I am trying to find a serious buyer for this. It is was the last one left. It was not in the U.S, and will be here soon as I stated. I will let it go for 500.00 shipped to any of the 48 States, but again I am looking for someone that truly needs this, it's going to...

Hy that is great to hear you're doing this. I as well have plans to do this next year. I have a '92 Supra and I am swapping in a 1jz as we speak. I thought it would be a nice thing to do for the car. I am tired of the 7M, I am sure you may be on that path too. Well I hope everything goes...