Search results

auto or man doesnot matter. 89+ is specific to match plugs. you will need a map and air intake sensor along with the aem ecu. also you will need someone to wire in the correct pins in the plugs for these. it is highly recommended to get a wide band to go with this ecu standalone. if you...

promises, promises. hope you dont have to quit your job to go.

always like the super drager. did that car come with the aluminum DS? i need to get down there and see it.

The appraiser should add in another $2,000 to the value for not having a gay blue interior in a white supra.

Back in the day we had CB handles instead of cell phones. My friends and I would talk on the radios on the way to and from school. My first car was a 78 Celica (Supra Mk zero?). I was handed it down from my sister. It of course had a CB radio, an eight track player (pioneer), and a PA...

pull the abs fuse and see if it goes away. if so you have a bad abs sensor or the abs serated rotor is not perfectly round. I had a abs rotor get very slightly bent when a wheel bearing was replaced and had to get a special gauge to measure the outer circumferance of the abs rotor as i turned...

getting the correct size pipe that will sit on the suspension arm and still allow the bushing to be pushed thru is needed. also another pipe/shaft that will sit on the bushing and be smaller than the OD of the arm is also needed. this can be difficult to get. i found some at my friends shop...

My no. 6 was egg shaped bad but the composite part was not that bad. I bet you have to shave a lot off the head and probly a bit off the block for a mhg. My head had a lotmore cut than i would have liked. New oil pump would be a very good idea for your rebuild too.

yes 7m you can tell by the oil and water jacket openings in the head. i ended up with 9:1 CR. nice spool too.

some pics of intake ports. swain tech gold coat and skirt mc9? coating. the gold coat is perishable and will absorb moisture if you dont install pistons and fire up the engine after receiving them back. the coat will turn green and start to come off. they are shipped in bags of nitrogen so...

I had swain tech coat my head chambers and exhaust ports and valves. it cost a little cash (more now than then) but i would think that keeping the heat out of the head and coolant would be helpful. many dont do this extra expense but only coat the piston tops. Yes they get hot and dont have...

I have been running an AEM for about 2 years now. send me your map if you need some help tuning. Once you get the hang of what all it can do and how the different settings interact with eachother it is a lot of fun to tune.

are you sure your hids have a high beam light? some hids do not have a high beam at all or is an option.

i mounted the aem unit directly to that bar above the glove box. i had to cut a little bit of the dash edge off by the left side of the bar. the bar goes behind the dash up in there and when i put the aem up parallel to the bar the serial cable plug hits the dash on the left. i cut the dash...

there are early and late 89 harnesses. the 90 harness is different from 89 and 91+ and the 91,92 are the same. of course auto vs manual and turbo vs n/a are different. the 90 would have a white air bag plug the 89 doesnt and one dash plug is different. i have not compared my 90 to a 91...

stop using rachets and buy a 1/2 inch breaker bar from parts store and a 1/2 inch socket for the bolt. Is is 17 or 19mm? You may have to put some heat on the bolt without heating up the balancer. the balancer has rubber in it that you dont want to heat up. you loose a lot of force with a...

i may not know what all you will be doing with the helicoil but wont the hole be too big after you drill for the helicoil tap to allow this insert back in. wont the insert now have a smaller diameter than the hole?

dam sure took long enough for this problem to be remidied. Shame you had to go thru that other BS before you found sethron to do it. what would he charge for a mk3 long runner FFIM? all that will look great in the car.

i had a similar problem. all three of these lights would come on and stay on. Mechanics did not know why. battery would be fine but would go dead after a week or two would go by and if i did not crank the car. looked at the wiring diagram and all three of these lights have a common ground...

really nice setup. those wheels make a difference. i thought you like chrome wheels on black cars. those do have a aluminum accent around the edge which sets them apart from the car. really nice addition. I bet that car still sounds like a chick car with no turbo yet. does this mean i...