Search results

Removing the evap system may not be right, but its better than having open vac lines like the previous owner had it. My car never had a charcoal can. I plugged off the vac lines and got a vented gas cap to "Fix" the problem. As for the water temp gauge, where would you suggest that i probe it...

Sorry man, this is my first car, and im still new to stuff. Just want to do everything right the first time ya know. Only reason i asked if i could put it in the BVSV is because for 1 i dont use it, and two i was going to use this to install the water temp probe, but i figured why not get...

Im actually just going to get a oil filter sandwich plate with two 1/8 npt's pre-drilled in it. http://prosportgauges.com/oil-filter-adaptor-plate.aspx Is what im getting. Will the oil pressure be the same here as it is on the side of the block?

First thing im going to say, sorry if im making a lot of posts for everyone, but i just want to make sure i have everything right before i place my order. Does anyone know what the thread is for the BVSV? Since i took out the charcoal can and plugged off the vac lines that lead to it etc, im...

So im about to order a aftermarket oil psi gauge, and i have a question about the stock oil psi gauge/sensor. Since i wont be using the stock one, can i simply remove it? This page http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=044 says that its only used to turn on...

Sounds good. Do you know what problems will happen if any if i just simply remove the stock oil pressure sensor and put the aftermarket in its place using an adapter?

This one would have an extra 1/8th npt wouldnt it? I only need 1 extra, not two. Im only running a oil psi, not oil temp and oil psi. Im still trying to figure out what the TCCS uses oil pressure for, or if the sensor is needed.

Thanks for posting that, but i found that earlier. Someone said something about them being in the group buys and i went and looked for it. 10% Discount FTW!

Copied this over from my Prosport gauges questions thread. Is that it? If so im about to go ahead and place this order.

So this is what im about to order, does this look like everything i need to install the gauges too? (Water temp gauge radiator hose adapter piece) http://prosportgauges.com/water-temp-sender-radiator-hose-adaptor.aspx?variation=18 got the 34mm one for the supras (Adapters for stock oil sensor...

So if i order this, and use the 1/8 BPST to the 1/8 NPT threaded one, and screw that into my stock oil sensor location ill be good? What are the downsides to removing the stock oil pressure sensor? Will the car act funny or anything? Im just curious cause im not going to be using the stock oil...

What gauges do you have? Im about to get the premium oil psi and water temp ones, but i don't know what adapters i need etc. I made a post in another thread about how to hook up an aftermarket oil psi gauge, and someone said i need a Y splitter to run it off the stock sensor location, and...

Nvm. Found it.

Has anyone ever heard of them or anyone running them? There so fucking cheap, i cant but help to think there just going to be trash. Oil Psi http://prosportgauges.com/blue/White-oil-pressure-gauge-52mm.aspx "Premium" Oil Psi...

thats what i need to figure out. what does the tccs use oil pressure for...

So i need a Y adapter that goes from the stock 1/8 bpst to (1 male 1/8bpst, then 1 female 1/8bpst, and 1 female 1/8th npt?)

Well my factory oil psi gauge is kinda broken, and bunch bs. So i don't mind doing that. Also im on the stock oiling system, thats the next thing to upgrade. Water neck thing, awesome. Did you get the 34mm supra one?

I will probably go ahead and pick up that adapter, that looks awesome. I was also thinking about the stock BVSV location, Since i don't use it. And for the oil pressure, just unscrew the stock one that goes into that bolt thing right of your sandwich plate and screw the new one in? Should i use...

Ill look for the stock location using Cygnusx1. Anyone know exactly where its at? Also, would the upper be the best place to probe it in at? I could use the BVSV place on the t-stat housing, since i dont have a charcoal can, and the vac lines to/from them have been plugged etc. Would that be...

So i have yet to order my gauges, (Going to get a electricial water temp and oil pressure gauge/s) and i was wondering wheres the best place to put the bungs, or sensors or whatever i need to do to install them. Im going to have my mechanic put them in, but i was just wondering where i should...