Search results

Thank you! Your gonna save me tons of time. Ill do that tomorrow and make sure its all good to go.

Is there any way to check it with out pulling the downpipe off the back side of the turbo... thats such a pita... I mean im not worried about it as long as it stops at 15 once i put the EBC on cause thats what i plan to run daily, but... i don't know where im going with this. Guess i could...

I tested the wastegate before the turbo was put on the car, and running 15psi out of my air compressor opened it wide open.

So i have no boost leaks (Tested with a air compressor). No form of boost controll right now (Took my MBC off, should be getting a EBC soon, MBC was also a bleed style causing a leak) Anyways, i did all my boost leak test stuff, got them fixed. No more leaks. Now the problem is, my boost creeps...

This was posted on a local forum. I lol'd WAY too hard, especially at the pictures.

Don't flame me but hasn't this been convered numerous times that the stock HG is a lot thinner than 1.2mm once its compressed? Yes its 1.37mm but once its torque'd down and compressed isnt it thinner than 1.2mm? Again, IM NOT SURE ON THIS! Just... seeing.

x2 Throwing a tip on the stock muffler isn't going to do anything, you might as well just take that tip back and save the $ till you can get a real exhaust. Not to mention not all exhausts have to be $600+, you can get one locally made usnig a Apexi N1 can for sub $300. Eaisly. (Not...

i have a 3" exhaust from the turbo back. TMS DP w/ the Elbow incorperated in it, a test pipe, and the blitz nur spec. Night and day difference on the spool up time of the turbo. (I can build 7lbs give or take 1 or so just using the foot brake / ebrake to power it up)

You know your from michigan when you come to ohio to get rust free cars! (Coming from someone who lives in columbus ohio)

Jamie's supra ^^ Hes on a local board. His car is freaking stupid sweet. I think the way his car sits he'll probably pull off some 7.7s. Also, i think i can find some videos of his old car back when it had the TOP END license plate on it, mmm freeway runs. EDIT: Heres 1 old video...

I feel you on the shitty snow situation. Its probably not as bad here in ohio as it is there, but i was at a party friday night when it started snowing like crazy. My normal like 10 minutes drive home took nearly 40 minutes because i wasnt going faster than 20 in second gear. If i tapped the gas...

I didn't read through all this , way too much , but did you clean your ISCV? I cleaned mine a few months ago because i had a horrible idle, and it helped a ton. Mine had so much black crud in it i wasn't suprised at all.

Isnt that the car the ran the 7.91 in the video above mine? Anyways SW is a monster at driving.

Ill see your FAST, and raise you FASTER! http://www.youtube.com/watch?v=CXa9ggyHa10 EDIT: MDC posted the 6speed irs record and i posted the auto record (Not sure about the rear end)

x2. I took off my MBC (not sure if its gonna help as much) but it takes a lot longer to fully spool my ct-26. Ill get 10lbs low, but now it just keeps creeping up towards 14-15lbs without the MBC on. Its all good though cause my MBC leaked a ton of air (Not sure if it was a bleeder style) but it...