Search results

i have a sc300 2jzge in my mk3 and i want to bolt on my ffim but the powersteering pump resivor is in the way so where do i find that flange or nipple for the return onthe pump for where the resivor would go? and what do yall do with the return line for the fluid, cuz i just ran it from the rack...

r154 seems to be leaking from the bottom of extension housing where it meets the intermediate plate. so either aerodynamics are sucking the fluid from the DS seal to the front of the extension housing or the extension housing is leaking. I vote rear seal to DS but i want to ask the professinals.

http://www.ebay.com/itm/Supra-MKIV-M...067c26&vxp=mtr So i have this manifold but i need a wastegate for it and all the 40mm or 50mm i can find are knock off parts and from what i read about wastegates the cheap ones leak or fail and can cause engine damage. what are some wastegates...

So what do turbo cars have? LAAAAAAAG well ive been very interested in mocking up a compound turbo setup to use a small and large turbo. But im lost on the pipe diameters to use and the sizing of turbos to respond with one another. like a 45mm to a 80mm turbo and what size wastagates and how...

this is the last thing i want to fix before i put the supra on the road, i swapped a 1992 sc300 5spd into a 7mge 5spd 1986 supra. the car runs but if i turn A/C on the idle drops like skrillex dubstep songs. haha so this red with blue wire i found goes to what wire for the 2jz? i have the entire...

so i hear about the walbro 80 and the denso mk4 tt oem pump and the bosch inline pump...but im not sure which to go with? im after a goal of 400-600hp in the future on a 2jzge. what are pros and cons on these pumps? noise,service life,price,fitment?

ok ladies and gents ive got a tech question. What are the differences in AEM v1 and V2? pros and cons which is a bigger bang for the buck? i dont want to hack up the harness with a piggyback so im going with a pnp standalone but which one?

86' poopra i swapped a sc300 2jzge and r154 with 3.91 lsd into it and i had the 2 piece DS balanced and i have a ford ranger carrier cuz the yoter one shit the bed. anyways there are high frequency vibrations at highway speeds. i cannot make out what is behind me in the rearview mirror it shakes...

swapped a sc300 5spd into a 86' mk3 and im having difficulties figuring the wires for idle up for when ac is on and vsv water valve for heat plug pictures or pin outs for body harness would be awesome!

So i have the EMU. and the 2jzge whats to be with the hx35 turbo. ***so i know i need a wideband like this one? -...

Hey supra owners, so yall that have put a hx40 or hy35 or hx35 where did you find fittings to supply oil and return oil for the turbo. i assume the ebay t3 stuff does not work on them? what sort of oil restricter is necessary? and 10an is the return size i have and 4an for feed.

Noob,novice questions So i have a mk3 supra and a e-manage ultimate now i want to run boost on the 2jzge that's in the car. so Ive got a turbo and intercooler and all the tangible physical parts. but now im stumped on the sensors and actuators. i deal with PLCs at work so i get what inputs...

So I've got a hx35 and a 2jzge and they wanna be together. So I ordered a fleabay.com Turbo manifold and 3" down pipe w/ v bands. Problem is I noticed that the holset doesn't have a v band on exhaust out. So question is" are all t3 exhaust housings the same 5 bolt pattern? If so ill order a. 3"...

1986 NA Problem: NO Bright brake lights When i bought it, it didnt have the one piece spoiler. after i installed the spoiler that made the light come on in the dash for the tail light failure. i didnt care because all the lights worked, (drove it all that year)well over the winter i...

I have a 2jz with 1jz flywheel and a r154 transmission plans are 400-500hp range and a daily with spirited driving no track or drag...maybe once at supra meet :naughty: so here is the line up im looking at. this full face seems to weak: http://store.driftmotion.com/static/i-ts2-hdss.php aron...

just built a 2jzge with a 2.4mm MHG and i want to use a hx35 because it has similar characteristics as the ct26 as 57 trim. and the holset is big down here in the south with all the diesels. anyways im curious how a hx35 does on a 2jzge and will it produce enough to get 500hp on a 8.5:1 CR while...

i work at a starter and alternator shop and have access to database of all cars. im curentally doing a 2jz swap with r154 transmission. and was curious about what starter(s) will work so here it is -all mk3 starters will work with all transmissions so -w58 starter will work with automatic...

what manifold will fit the hx35 turbo in mk3 supra? and i know where to drill for oil feed and return but im lost on the plumbing of it all. what kind of hardware? are there kits available just for feed and or return? whats to small of a hole? what to big of a hole? the engine is out and the...

driftmotion sells a adapter to use cobra brakes, i have been looking on forum to see if anyone has used this setup and what did they think? -Is it worth the time and effort? -i assume parts are easy to find? (calipers and pads) -stainless soft lines have to be custom?

"so am I putting the motor in right?" HAHAHAHA some mexican friends got a rod knock in there 7m (surprising right!) admitted to running it low on oil :biglaugh: anyhow they got the motor out of the engine bay and took oil pan off to find it didnt have rod knock but welded rod bearings! so car...