Search results

  1. flyjum

    Fried some steaks now time for oil change?

    http://www.getg.com/products/products.php?CategoryID=1&ProductID=1 Has anyone seen or used this beef tallow oil before? It has a SM rating yet is made from beef fat.
  2. flyjum

    Injectors not firing. HELP!!! After BHG job

    after sitting for almost a year we decided to yank the engine. We tried and we failed. turned out to be a nightmare. many wires were fried together and the ecu itself had burn mark across much of the board. The only thing i can think of is a hardcore lighting strike hit the car while...
  3. flyjum

    7m-gte longblock

    It just woud be less cr and you will have to plug the turbo oil ports/returns. If your boosted it would be better but na would be slighty less hp/tq maybe 5-10
  4. flyjum

    Injectors not firing. HELP!!! After BHG job

    please stay ON TOPIC. You guys can chat about tools anywhere on here, but i need this fixed asap before i leave the country. it has SPARK the injectors for 100% sure are NOT fireing the injectors ALL have contact 12 v checked all grounds car runs when gasoline is put in throttle body We...
  5. flyjum

    Injectors not firing. HELP!!! After BHG job

    Bump still need help still not firing any What else could it be. IT HAS SPARK for sure.
  6. flyjum

    Injectors not firing. HELP!!! After BHG job

    Got spark how many grounds are there on the Inatke Manifold will check 12v again. No CELS showed up yet
  7. flyjum

    Injectors not firing. HELP!!! After BHG job

    I replaced my head gasket, did all everything, hooked up wires grounds...we checked every ground, every fuse. the cold start injector fires and sputter starts then dies. so the injectors are not firing... We voltage tested the CHARGE fuse in the engine bay. This is the strange part...
  8. flyjum

    Wotm invitational drag race. OCT 11th

    Any one hear about this? Im going for sure any one else? Turned out to be ok but... Ryan did all he could to get BL and the others to run but the tech guy was a not havin it. Here is a post from ryan. Kean, SW, Chris, Justin, Stacey Barnett, and everyone else who was actually here knows how much...
  9. flyjum

    Getting psi and no codes but weirdly slow?

    What does that mean. The turbo? So do we need to replace the BOV or the turbo?
  10. flyjum

    Getting psi and no codes but weirdly slow?

    The car is a 87 7mgte. R154 trans and stock everything. Well we just fixed it and runs good... kinda. Well when we drive it runs good till it hits boost and bogs and sputters and does not accelerate. Could a bad bov be the problem? WHen we rev in neutral it sounds fine( bov seems very loud for...
  11. flyjum

    Any one ever have a Dynapak clutch?

    I have one in my 5mge. I can dip it in second and it just spins with 160 hp 5m. Good for price and you can always return it.
  12. flyjum

    NA guys have got to see this

    The NA stock 2jz is 240 hp right...? SO they added 30 crank hp only. Cams, exhaust, intake and port and polish should do that no? 6800 Redline my 5mge is 6750.... why so low. Sounds ok.
  13. flyjum

    Shaft play? Explain please. Wiring problem as well.

    I know what shaft play is but which way is worse... When your hold the fin if you can move up/down or in/out IE toward the back of the car toward the front. Which one tells if its blown. I have 2 turbos and one has in/out other is up/down. My freind just got a supra with 60k on new jdm engine...
  14. flyjum

    METAL IN MY OIL FILTER!!!!!

    I have someone who will buy your engine if you replace and not rebuild it. He live in tucson.
  15. flyjum

    new here/emissions

    Im in az and smog is easy as cake. I passed with no cat or muffler and a BHG. So you will be fine. If salvage title make sure you check all your lights to make sure they work as they check those. OR you can say you live where they dont have smog like camp verde or maricopa.