Search results

a full set of moulding's in cf?i'm sorry but your way off.i've seen plenty of beat up old take off moulding's go for more then twice that.

look's like it exit's the back of the car nice.

here's the q45 to go on the intake.i cleaned it up and cut off the idle up valve.i need to find a tps addapter for it

the funny part is you said why half ass it to me.i meant painting it nice,not spray bombing it.if you had both piece's allready clean,the powder would be ready to bolt on faster. i was just mentioning to the thread starter it could be done without taking the tb appart.i wasn't looking to start...

i can have a part bolted back on the car before your paint will dry:)

the back up camera is an option for my pioneer dvd player.i just haven't tried to do it yet.actually i haven't got around to hooking up the stuff for the navigation

you could try it at lower temp's.heat the part at 250*,then shoot it while it's warm.toss it back in the oven at 250 again.it will be enough heat to make the powder flow out.the part won't be as durable as soomthing that is baked at 400* though.it's not like the tb get's much abuse anyway's.the...

clean up the engine bay,make it easier to get at the injector's.i'll be able to pull my injector's in minute's.the whole iintake plenum can be removed alot quicker then the hour's it take's for the stocker.once i'm happy with my set-up under the hood,it will be time for paint.then i'll have to...

shine auto's replica is real nice and i'm pretty sure the greddy one is fiberglass

i've seen pic's of the 4runner recaro's also.i would imagine they will bolt to the jza70 recaro rail's.i wasn't aware of these seat's being used in the usa in are truck's.jdm as far as i know

you can almost see the foam through a couple of spot's on my driver's seat now.i would like to get some matterial for the future.it would need to be enough to do both front seat top portion's.

alot of trial and error to mount this thing up.i ended up un-wrapping alot of the harness to get it to sit under the runner's.i'll need to extend the cam position sensor wire's a good amount.i also needed to mod my fuel rail mount's ,because the injector's are at a different angle going into the...

i should have pm'd ron.his stuff is a work of art compared to what mine will look like when it's done. IJ.it's a stock block 2j(cams too) with a gt4088 A/R.96.i'm trying to get rid of some volume,i don't want to lose all my torque.i've allready cut the plenum down some and ordered some...

^^^thanks.i'm on the forum every day.i just don't think to go there,even though i check the GB section and fs section

i know ron built a 2j mani. for himself,but haven't heard of any other's.he is the only one that i've seen build one to fit a 2j mkIII.i haven't even seen a post from him in a long time.i figured he was laying low and not bothering with the forum's.i would have jumped at the chance though.i even...

sorry jdub.i decided to put it there because 7m guy's make more manifolds then jz guy's.all the threads i've read were in the 7m section.after reading many post's from yourself and ian,make's me want to cut the stack's off and round off the top of the runner's.i'm just scared of losing all my...

i bought myself a manifold for my car.it is a cheap china veilside replica,kinda like most people make and sell.i bought this particular one because it's two piece design.which i figured would make it easier to modify to fit in my car.there isn't anybody making these to bolt up to a 2jz in a...

are these brand new coil's or another set of used?you might want to check them for crack's near the mounting point's and also under the blue boot.that is ,if there used coil's anyway's

i just noticed in one of your pic's.the 2jz-ge water pipe that run's along the block faces up,which make's it nice for connecting to the heater core.on my gte block it shoot's straight out taking up dp space.i'm going to have to get me one of them,for next time my manifold is off.

i like having my turbo clocked like that also.on three different set-up's, i needed a cast elbow on the compressor cover.i'm actually waiting for an elbow to come in now:)