Search results

IJ did you find this while looking for a lower priced equivalent to FIPG? Or did you have a problem using FIPG, including a locating problem?

Well I did get a little done today after all. I have been in and out all day in shifts. I got my Cam Cover gaskets replaced first. I had to stop in the middle of the first one, and run to buy an inch-pound torque wrench. I got home with that, and found that it is good from 120-960 inch-pounds...

I just bought a tube of FIPG from Toyota, and I would like to see any tips, tricks, strange uses, facts, EQUAL alternatives, or other information about this stuff. I had one tube before, and I never used it. I let Noah89T use some of it once, but that's it. Now that I needed it, it was hard in...

A little more progress to report. I got the clutch pedal and master installed in the car yesterday. Brake pedal will be today. I also did get the housings removed from my wiring harness as promised. That's where a speed bump presented itself. Doing the swap requires you also rearrange which...

Welcome Noob! This is a classy way to get started around here. You should be able to get all the help you need right here in this thread. Try to post your ideas here BEFORE doing them, and you will get advise on whether it is a good or bad idea, and tips of how to best attack the job. Keep the...

Jdub look at the numbers. They prove out that he left out the value for vac on. With a 1/1 increase from 35, 15 would put him at 50. He stated 43.5, so obviously the pressure vac on he has must be 28.5.

Don't blame the 7M! I can't tell you the info you need to know. But, I can tell you that you will have the same type issues with every motor you try to swap out cams in. You will need to keep you clearances within factory specs I'm sure. If Toyota doesn't still sell them, I would think you...

Today's progress will be hindered by going with my son to pay off his new 240SX. It will be dark once I get home, so I will probably only be able to work on some wiring. I'm going to try to at least get the housings off of my harness tonight, and maybe get one or two of the new ones installed.

One last progress pic for the night!

OK, I did make some progress tonight! I'm going back out to work on wiring the clips a little before giving up for the night though. I'll be out the with the mutant Triple E Mosquitos. Ken asked me what those big ass bugs were! Here's a few pics. I got the fuel return hose removed from the...

^ Speaking of pics, and backing things up...............Uh, back to the topic at hand. I will be knocking out #4 and 5 tonight. I will post pics of that, the new clips, and anything else I can achieve off of the list tonight when I get home. I'm starting to hear a little thunder now, so...

I'M SO STOKED Like a smoker asking friends to help him stop smoking, I now ask that you guys look for frequent updates on my car!!!!!!!!!!!!!!!!!! I got my harness plugs in today (pics tonight), so now I can get serious about getting busy on this car. Right now, I can't think of anything I...

Thanks for the help guys

I got .8 qts of Redline I don't need! What is that?

I have a couple of questions. First, I was just given a parts washer. What type of solvent do I want to use in it? The first part I need to clean is my Power Steering Pump. Is there anything I need to not let the solvent get into? How would I block it from getting into the vacuum nipples...

I remember being present as a pre-teen when friends did this to an unknown neighbor "Just for Fun!" I watched and told them to stop, and c'mon lets get the hell out of here.

19PSI on a stock fuel pump? You upgraded you injectors and FPR, but not the pump. A Walbro is cheaper than your ARP head bolts. Get one before you blow that thing up! Are you monitoring your air fuel mixture?

91/92's are pretty limited, and thus worth more than other years. I would only borrow the parts from the N/A to put this one back together. Keep the N/A, and slowly buy the parts you need to put it back together as well. You're not truly a MKIII owner if you only have 1.

I checked mine out at lunch. My brake pedal is sitting in the floor right next to the spring. I guess I will have to pay attention to the outcome of this, as I am installing that brake pedal in my new shell soon. If I get it installed, and spring hung before you get it solved, I will post a picture.

That's a really dark picture! I'll look in the morning to see if I can help.