Search results

What kind of racing? Road racing, auto-x, drag racing? How much comfort do you want while on the road? Have you driven other cars that had a similar ride quality to what you're looking for? Jeff

I am confused. Why can't you use the A70 speedo cable with the Aristo's A340? The speed signal output by the A70 speed sensor in the speedometer will be correct for the Aristo's ECU input. Jeff

Correct. 0007047 is automatic. 0001897 is manual. Jeff

This thread be 6 years old. It didn't happen. Jeff

They will be new, not reman. Toyota doesn't sell reman engine parts. Jeff

I'm sure there are some people around here with some rods they could send you, alternatively if you need one quick/known to be perfect, order one from Toyota. You'll probably get it within a day or two. 13201-49045 Jeff

:\

Hard to tell with it being backwards like that. Jeff

In other words, approximately 0.05mm. Jeff

In other words, approximately 0.05mm. Jeff

Red-blue wire is heater positive (to one of the black wires). Black-red wire is heater ground (to the other black wire). White is sensor signal (to the blue wire). Jeff

The flywheel bolts directly to the crankshaft. There is no shim or spacer on either side of the flywheel, and generally one should not be used at all. The only time you would ever consider running one is if you have machined a significant amount off of the flywheel and are trying to space it out...

What kind of driving do you do with the car? How stiff do you want? What is your budget? There are numerous coilover options out there, but what your budget is and what you're looking to do with the car will make a difference as to what I'd recommend. Megans are okay for the price, but they are...

Usually the only time spacers are used in a manual transmission is to make up for the amount machined off of the face of the flywheel. Normally they shouldn't be there. With a custom clutch setup, all bets are off. You're going to need to find out what kind of clutch setup is in there, because...

12371-42020 Jeff

10mm is an acceptable length difference in my opinion. I will likely use the fronts in the rear. Thank you for the measurements, I appreciate it. Jeff

Worst case I will just check this myself, but I just wanted to have the parts ahead of time. If that doesn't happen I can deal with it then. Jeff

The shims are 25mm diameter, the buckets are 28mm. Since this thread is about shimless buckets, the size of the actual shims is irrelevant. Jeff

Your memory is wrong and the EPC diagram is sketchy at best. They are both 180 degrees from each other, front and rear. As for why I am asking, it is outlined above. I want to use Toyota end links in the rear that aren't plastic. The TSRM has a more accurate diagram of the suspension: The...

They still do have separate listings for the front and rear though, so I'm not 100% sure. Maybe I should email BIC. Jeff