The people's car - SupraMania.com 7m build

[gixxer750]

I'm still up for building it, as I said I would if seth decides not too...

 

[suprarich]

Just an update. I have scheduled a 10 point cage for this winter to be installed by one of the top guys around. He will tie the unibody frames together as well. I purchased a used th350, adaptor plate, pi torque converter, and driveshaft for the car. Once i am finished with the block, I am going to have a motor pulling night.

 

[suprarich]

Anyone have a wire diagram for a damper magnetic pickup type trigger? The cams I want to make for the car won't have a CPS gear. I am the first to admit that I am horrible at the electronic type stuff.

 

[suprarich]

Look what the freight truck came with today! Still gathering parts. Still need some stock springs if anyone has them.

 

[Slow66]

Hey, that stuff looks familiar!!

 

[suprarich]

It should! Going back into the same color car too! Needed to ask you a ?? on that tranny, call me at 330-618-4844 sometime when you have the chance.

 

[Slow66]

I'll give you a call before noon today...

 

[SilverSupraT]

I wish I lived closer. If i could help with the project I would be all for donating time/money. As it is though, I don't have nearly enough money to donate to a car I'll probably never see.

Great work so far and I think it's really cool that you've done this and it's actually working!

 

[suprahooked]

Hey Rich i have some stock springs, PM me your address. John

 

[suprarich]

I wish I lived closer. If i could help with the project I would be all for donating time/money. As it is though, I don't have nearly enough money to donate to a car I'll probably never see.

Great work so far and I think it's really cool that you've done this and it's actually working!

Thank you!

Hey Rich i have some stock springs, PM me your address. John

I will, because I cannot even fit a floor jack under this thing with the cut springs it came with.

 

[mk3]

any news on this thing, shocked to see so many people are so willing to donate. if i had money i guess i would...but struggling to finish my shit heap as it is due to lack of funds =/

 

[suprarich]

Still gathering parts for the car. I will be doing a lot of work to the car over this winter to try and have the car ready for TX2K9. Have not done much since getting the tranny and conerter in.

 

[gixxer750]

what else do you need for the car?

 

[suprarich]

It is an on going list. A good 87-88 turbo wire harness would be nice. Some race seats, harness, fuel tank sump, ect ect ect.... shout out anything you may have.

 

[Boost Lee]

Rich, If you don't have an ECU for it yet...

I've got one from my '88 Auto 7M-GTE that you're more than welcomed to have.

It's a shame, If I knew you had needed a wiring harness, with the exception of a few plugs, had one in mint condition that ended up getting junked out.

Jeff

 

[Yblegal91t]

you still need springs? i believe i have them for you. will check when i get home.

 

[suprarich]

Rich, If you don't have an ECU for it yet...

I've got one from my '88 Auto 7M-GTE that you're more than welcomed to have.

It's a shame, If I knew you had needed a wiring harness, with the exception of a few plugs, had one in mint condition that ended up getting junked out.

Jeff

AARRRGG, yes, don't think I will be using all the connectors anyway.
Will be using a AEM, Wolf, or other stand alone so no need for the stock ecu, but thanks.

Yblegal91t - If you ave them send them. Someone else is sending springs also, so between all the springs I will psi test them to make the best set of 4 from mixing and matching.

 

[funky_monkey58]

If you can ship the fuel tank to me I will sump it for you and ship it back.

-Sean

 

[suprarich]

If you can ship the fuel tank to me I will sump it for you and ship it back.

-Sean

What is your zip? I will see if it would pay-off to do this with shipping two ways.

 

[funky_monkey58]

what is your zip? I will see if it would pay-off to do this with shipping two ways.

56304