Ky Suprameet??!!
- Thread starter st2b
- Start date
Mike,
I got my Maft Pro during te last grp by & installed it early spring. I set it up for the basic settings & it did great for me on stock turbo & injectors. Drove it to the Dayton Oh meet & back along with weekends. Last month I put on larger inj. & turbo & its still running great. I'm going to have Dave fine tune it on the dyno in Nov. so I can get better performane out of the car.
I got my Maft Pro during te last grp by & installed it early spring. I set it up for the basic settings & it did great for me on stock turbo & injectors. Drove it to the Dayton Oh meet & back along with weekends. Last month I put on larger inj. & turbo & its still running great. I'm going to have Dave fine tune it on the dyno in Nov. so I can get better performane out of the car.
Fuzz420
Are U Here 2 take My Baby
Fuzz420
Are U Here 2 take My Baby
The 90 monster has gone nowhere, all i have received is apologies and empty promisesBoost Lee said:
On another note someone was getting a some block work done at a machine shop in shively, the shop was stumped on what to do with the pistons(probe im assuming) so good thing i had some "superfly machining instructions" to get them going:naughty:
i will try to get some help off you guys on the setting some time right now i'm just sick of the disapointment and let downs with this car and have no understand of tuning the maftpro
mike-
do you have a laptop pc? i can email you a base map that i use and you can upload it to the unit.
15-16:1 i wouldnt be too concerned with. the ecu is still trying to relearn all the setting ant it will take a bit.
do you have just the basic setup on it right now? (how the manual says to set the parameters)
do you have a laptop pc? i can email you a base map that i use and you can upload it to the unit.
15-16:1 i wouldnt be too concerned with. the ecu is still trying to relearn all the setting ant it will take a bit.
do you have just the basic setup on it right now? (how the manual says to set the parameters)
no my set up was done by rtc off a the dyno so i suppose it isn't the same i have a labtop but i don't know anything about the base set up or anything any help would be loved
supramk3man said:
do you have tunerpro installed on your laptop?
matt- i think the list is pretty well set. i havent heard from anyone else that might be able to come.
i talked to tony yesterday. he said he bought a video system to install. since there will be quite a bit of people he has it set up so people can see whats going on inside the garage from the patio area. i thought that was pretty cool.
ok, here is how the price breaks down. tony is cutting us a pretty good deal.
hookup and 1st run is $35. then you can do as many more as you want for $15 per. so people that really just wanted to do a single baseline pull, its super cheap. it also allows others to do as many runs as that want. most meets are 3 runs at a set amount. if you do 1 or 2, its the same price. so i think that works out well.
prices again include wideband with datalog, boost sensor with datalog, printed sheet, and a video.
hookup and 1st run is $35. then you can do as many more as you want for $15 per. so people that really just wanted to do a single baseline pull, its super cheap. it also allows others to do as many runs as that want. most meets are 3 runs at a set amount. if you do 1 or 2, its the same price. so i think that works out well.
prices again include wideband with datalog, boost sensor with datalog, printed sheet, and a video.
That's a damn good deal. I almost want to dyno my 3G just to see what it's got, but I'll be taking a truck to pick up the motors.
I hope to put some miles on my new clutch before then and maybe I can bet a baseline on my motor with the stock injectors before I start upgrading. I have a couple of small leaks right now that I need to get fixed and I probably wont be able to do that before the meet.
dbsupra90 said:
Sounds good, Dave. Maybe too specific of a question to ask you, but do you have any idea how they are recording video? (Or I guess what I'm asking is, how will we be able to get it in our hands). ? :naughty:
Prices are fair...but it's even better that they allow as many runs as possible.
Hey when I dyno my car, will I be the one dynoing it? Just wondering, I thought it would be a good 1st for me.