chevyeater said:
I called a couple places that make them and they are not made for stock chassis/crossmember. Do you know anything different?? Thanks!
JT2MA71's Build. Dyno video on post # 1191
- Thread starter jt2ma71
- Start date
I called a couple places that make them and they are not made for stock chassis/crossmember. Do you know anything different?? Thanks!
IJ, I don't know yet 
Yeah stock A80 chassis. But if it does not fit that, I figured it won't fit the A70 either. The bullish one is made by ARE, it's cast aluminum. The other one is by Moroso. They both said notching the stock crossmember may be needed but they are not sure. Ron
Yeah stock A80 chassis. But if it does not fit that, I figured it won't fit the A70 either. The bullish one is made by ARE, it's cast aluminum. The other one is by Moroso. They both said notching the stock crossmember may be needed but they are not sure. Ron
Last edited:
I think the Moroso pan clears the A80 subframe but, I know at least one 2JZ around here that puts 1100+ to the rear wheels (thru a powerglide!) on a wet sump system with stock pan and has been on the same bottom end for years, even daily driven in nice weather...
Ron: Not sure with the latest crop of pumps but the older types are noisy as hell on the suction side and this is amplified by the tank......
Not sure what chassis the new motor is going into but there's not a lot of alternatives for mounting one that would be outside the passenger compartment!
Not sure what chassis the new motor is going into but there's not a lot of alternatives for mounting one that would be outside the passenger compartment!
I figured it would be a bit noisy because of the scavenge lines sucking oil and air. But we'll see. I may have an idea on the tank location. Ron
Dummy pump showed up today from Barnes. New one will soon get here
This shows how it will be installed with custom brackets
Oh yeah, a KRC tandem power steering pump will mount behind the Barnes.
--Ron
This shows how it will be installed with custom brackets
Oh yeah, a KRC tandem power steering pump will mount behind the Barnes.
--Ron
group a supra
SPAWNING AN INTERCEPTOR
Like I said, updates are going to be slow. I got the oil pump and ps pump mounted where I want them to be and waiting for my designed bracket to be machined. Behind the oil pump is the power steering pump.
Last edited:
group a supra
SPAWNING AN INTERCEPTOR
Here's the bracket I designed to mount the bottom part of the pump as well as to adjust the drive belt tension.
Last edited:
That's freakin nuts. I'm insanely jealousjt2ma71 said:Here's the bracket I designed to mount the the bottom part of the pump as well as to adjust the drive belt tension.
