7M+5M+6M+M3.....Confused??? :-)

[Jens Lyn]

Hey all.

I just want to show some picture of my new engine that i am building this winter.
This is the description so far...

7mge 24V head.
5mge pistons modified for 24v head.
6mge short block.
Itb´s from BMW M3 3.2.

The engine will be mounted with new bearings, rings, metal head gasket, and new gaskets.
I have got 296 degrees cams for the project, and also i have to make 2 adjustable cam gears.
The exhaust header is fro OBX, and made of stainless steel.

Here is some pic...more to come.

The modified piston so i can raise the comp. ratio...

More will come later...

best regards Jens Pedersen

 

[Supra_Villan]

epic fucking win

 

[RockPaperSwoRD]

how high compression are you aiming for? how much hp ?

 

[BorHor]

That is pretty sweet.

 

[JDMMA70]

sweet mother of god

 

[crimson88]

subscribed

 

[Jens Lyn]

I hope to get around 11:1 at compression rate, and a place between 250 and 280 hp in that engine.

I will build it as crazy and wild i can on the original parts.
then someday i will upgrade to 85mm custom made pistons and rods .

Looking forward to hear this thing rev

Best regards Jens Pedersen

 

[crisp]

I can hear Handel's Chorus already!!!



HALLELUJAH!!!




...for those less cultured... that would be HOLY CHILD OF GOD!:aigo:


Or something like that!:biglaugh:



Truly epic! SUBSCRIBED!


What's your redline target?


-crisp

 

[Mk3runner]

thats pretty cool

 

[Jens Lyn]

The last engine i made with itb and original parts revs up to 8000 without any problems, and that is with hydraulic lifters.
This one her is with mechanical lifters so it is a little better , but stille the pistons and the rods are the weekest parts.

 

[Jens Lyn]

The flywheel will be this one that i also made by my self .

It is tested on my other engine and works very good !

Incl clutch the weight is 8.6 kg, and the original is 17kg .

 

[remkye08]

sweet bro i wish i could be as good as u with engines

 

[supraduper]

i always wanted to know if you could make a 32. bmw itb work... did you make your own flange?
what about sensors?
you gonna run on mge electronics?

pretty awesome man

 

[BlackDynamite]

sweet mother of god

I said the SAME thing!

 

[crisp]

I said the SAME thing!

...on another note... I just stole your sig quote...:biglaugh:


Carry on with this epic build!


-crisp

 

[pbasil1]

Absolutely SICK!

Subscribed!

 

[Supra_Villan]

the flywheel...you are a madman!! lol

 

[Supra_Villan]

i love how you are using all original parts..i'm not an n/a guy myself but i can for sure admire one. I was always jealous of the other vehicles that could mis-match factory components for a better purpose (such as honda's and the 4cyl yota's) but my envy has been cured!

 

[Jens Lyn]

i always wanted to know if you could make a 32. bmw itb work... did you make your own flange?
what about sensors?
you gonna run on mge electronics?

pretty awesome man

Yes i first made a drawing of the flange, and then had it made on a cnc machine.
The sensors is all from the Electromotive Tec3R, that i use.
It is very good .

 

[Jens Lyn]

Here is some pic from the construction of the flange .