Search results

I think I can try one of those. The stock just won´t do and going to an external it´s quite costly, specially when I have two cars that need them. I guess I will try it in one of them and then decide. Hope I don´t mess the rod bearings and crankshaft again. Can you name any car that has one...

Thanks guys. Not sure if those will be enough or if I will have to go with an external oil pump. The engine revs around 9500rpm and has over 820hp to the wheels and I´m having problems with oil volume. I´ve seen most of the high hp, hi-reving engines with external pumps. Any advice will be...

Does anyone know of a high volume oil pump for the 1jz?

Does anyone know of a high volume oil pump for the 1jzgte?

Thanks a lot man. Do they have a spec sheet about the length width weight etc. As soon as you get the motor running let me know, because I heard some aftermarket rods are not made properly and you end up with rod bearing failure. That's what I heard. Please keep me posted. By the way, I...

any pictures that I can see. specs, does it have the little hole from the top bearing to the side of the rod. Thanks

Can you tell me if the greddy rod has the small hole on the side of the rod that comes from the top bearing in the big end? Do you remember the width of the greddy rod or have a spec sheet? That would really help. Thanks

They still fatigue with hi hp for a while. I have one of my 1jz's with over 800 to the wheels.

I can send you pictures of them bent and broken. It was after 2 years with over 760hp to the wheels but, they break.

I know they are stout, but after a ton a abuse they get fatigued and bend or worst, break.

Has anyone installed aftermarket rods on a 1jz? Any problems at all? Please let me know. I'm planning on doing it and need some feedback. Thanks

Are you talking about a 67mm compressor wheel turbo? I haven't seen a 67 trim t04e turbo. Check the specs on the turbo. A to4s will spool fairly good with a .96 a/r but with a 67mm compressor it will not.

different angle on videos http://videos.streetfire.net/video/Hiper-Racing-893155mph_168301.htm http://videos.streetfire.net/video/Hiper-Racing-887157mph_168088.htm

http://s261.photobucket.com/albums/ii43/tiburon_blanco/?action=view&current=833088d1.pbr More videos of the Corolla. Here is easier to see and hear when I backed off the throttle a few times and still did 8.93@155. On the 8.87 you can here it also.

No, it's a double diaphragm single disc.

You betcha!!

The car has custom one piece driveshaft, 3.91 gears (would have been better a 4.10) and a non-turbo flywheel with a push conversion. The r154 has survive pretty well on my cars. They weight from 3100 to 3500 pounds and the only car that have broken one is one of the 1jz ma70 that has done 10...

Yes, is street legal. There was oil at the end of the track.

I think he means my ma70 with 1jz 5spd that has done 9.48. I just came from the track having traction problems in 2nd and 3rd gear on the AE86 and still did 8.87@157.93mph. You can here on the video the tires spinning and I backed off the throttle and hit it again and starts spinning again. i...

Here are pictures of the engine.