Search results

On the Corolla o.s. giken triple disc. On the black supra 1jz a 2jz aluminum flywheel with a 2jz clutch masters pressure plate and 3 puck disc On the 7mg a non turbo flywheel with a clutch master pressure plate with an o.s. giken push type conversion.

It can be done on all seasons but you need more skill and more hp.

I'm running 26 x 10 mt's slicks. Here is one video of the Corolla http://www.youtube.com/watch?v=WTP1nzMjDnk

If it had a lot of torque, it would have spun the tires!!! jajaja

Close to 475hp. Maybe more

It has a stock suspension. Rear wheel are 15 x 8 pro star with 5.5 backspacing. The front wheel is 3.5 and only comes with one size backspacing. Usually on the street I use it with the 93-98 non turbo wheels. I tried the car lately with apexi adjustable shocks and springs and feels steadier...

I haven't done a 7mgt with twin turbos, but, the 1jz spools faster with the twin set up. Same thing should happen with the 7m.

Here are some pictures. I added one of my Corolla with a twin turbo 1jz.

To run 11's is fairly easy if you have a stand alone ecu. Just need and intercooler upgrade, 60-1 .81 p-trim turbo 550cc or 750cc injectors. 3" or bigger exhaust system, metal head gaskets, arp bolts and a set of et streets or drag radials. We have done low and mid 11's on pump gas at 17psi...

Well "compatriota" it depends on how much nitrous you are going to use and what do you want to achieve.

4.10 in the black and 3.90 in the blue

I estimated around 750hp to the wheels. I haven't dynoed them. They were tuned on the street.

Black car: stock internals 1jz, blitz twin turbo kit, 800cc sard injectors, microtech ltx12s, 38psi. Blue car: 7mgte, crower rods, wiseco pistons, 264 cams, ta45 turbo, microtech ltx12s, hks head gasket, arp studs, 23psi. The time on the board for the black car 9.65@145.64. For the blue...

Yes, both have the stock r154 and the stock lsd's.

They are 5spd. Go to streetfire.net and write "hiper" in the search box and watch were it says "1ra ronda match sergio 7m vs fito 1jz"

The blue car did 1.41 and the black 1.49 60foot. They both have done better. I think on the 1/8 the black did 6.2 and the blue 6.3 but I have done 6.12 with the black (1j)

I will look for them. You can see the et and mph on the board.

I like the 60-1 with upgraded intercooler, metal head gasket and studs. On the fuel at least 550's. It's easier to do with a stand alone. You will also need good tires as the et streets or drag radial. We have done with this set up at 17psi and pump gas 93 octane 11.3@121 with a 3.5" exhaust...

I wish there was a road from here to Texas. There are a few 7m's here doing 10s.

Hi guys you can see my twin 1jz mkIII and a pass of my 7mgt mkIII against one another (my brother in law driving the blue 7mgte) on www.streetfire.net Just write in search "hiper" and the pass one against the other were it says "1er pase match" hope you guys enjoy it.