I just put my bic ddp and test pipe on and it spools great. I havnet got on it hard but i can feel the diference. The only problem is I can hear the exhaust comming out of the dump tube and it sounds ricey when I take off. Is that normal? or is something wrong?
Having a smaller gear will put more load on the car and turbos love load. The gears you have now were over revving your powerband. Putting a higher gear numerically will not always make you faster as most people believe. The best example I can think of is the crown vic cop cars. They have the...
It will have a comp 304hr with .612 lift, fully ported 781 heads that can flow 311cfm @ 600 lift, a victor jr intake, 4.56 gears, and max rpm will be 7k. I would like to hit full boost a little before 3k.The carb will be a 850 mechanical sec. that I will have custom made after I get everything...
It currently has a Hughes th350 in it but if it decides to go I will put in a powerglide. It says in the add that there t70 is comparable to a garett t61.I want to run 16psi on 91 octane with a 8.2:1cr will running two of these spool fast on a big motor like this. Each cylinder is 1 litre...
This question does not pertain to a supra but you guys are very knowledgeable about turbos and the place I usually post about my nova doesnt answer my turbo questions. I want to twin turbo my big block 496. I was looking and saw the t70 turbos on ebay and thought that was a good deal. Is anyone...
I pulled the front axle hub off my car to check for a noise that was coming from there. It turns out the person who did this before me warped the nut badly and crushed a lot of the threads on the bolt in the hub. Does anyone know where to get a new hub? I pulled some parts off a Na supra in a...
I wanted to know what was the average time you guys waited for your dowmpipe?I ordered a bic ddp and test pipe 2 weeks ago and it hasnt shipped yet.I ordered it from hpf.Is 2 weeks reasanoble as I know it may be backorderd and theyre custom made. any help is greatly appreciated.
The guy I bought my supra from tried to put a tanabe 3.5" system on mine because he had it left over.He said it didnt fit so he ran 3'' back to the rear suspension then expanded it to 3.5" to the rear. He never told why exactly it never fit.
you can run a nitrous rpm window switch and a full throtle saftey swith to come on after idle and turn off after your boost hits. It will only doo this under full throtle so you wont accidently use it.
I pulle my rotors off today to check the thickness and scuff them up because they were squeeking. When I finished the ABS loght came on. Im confused I didnt touch the sender at all. Then, when I went to pull the coodes I got 25 and 26. In cygnus it says its runnin lean(25) and rich(26) How the...
I pulled the accordian hose and there was play in the turbo. I pulled the lower ic hose and no oil came out.Im confused now.I pulled the oil cap off and there was some smoke but it was a cold motor and didnt look like enough to worry about.I know i need to rebiuld my turbo because of the play...
I was looking around 935 and I saw there street ct26 upgrade. It has a smaller compressor wheel so it will boost faster. that seems to be the opposite way that everyone is going. would that be better for a 400whp ride then a 60-1. I will keep it at 10psi and run a dual stage bc to 17 when i get...
Im new to the supra world but built some cars to go down the track. ive heard the traction arms bend the first time you get good traction. the next part I would think would be the U joints as those things are tiny as well.I ve herd the axles can hold up pretty well but the torsen gives out if it...
drag radials are easier to control at speeds then bias ply slicks so if you have never used them Its a good start. If your running on a real trck that uses the vht you will start breaking things on either the dr or the slick so just be careful.
I was going to buy a ddp but I guess that will wait a while. I might as well buy an upgraded turbo while im at it.Yes, it only really smokes under boost so I stay out of boost now. The leak is at the elbow so I was getting the ddp to fix that and get some power.I will pull the hose and check the...
Whats a way to check if the turbo oil seal has blown out? I heard you can take the lower ic pipe off and see if oil comes out. I did this and about a 1/4 quart of oil came out. Is this the turbo or a bad pcv system. It also has an exhaust leak by the turbo and it blows all the smoke inside the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.