email curt (elmhursttoyota) or jeff (champion toyota)
they will definite have it and can send it over to you but don't know what is the price.
you can always ask them to ship it 2nd day thru uPS
thanks lagged and everyone
i don't think there is any hydraulic shop around my area.
i will have to check for the yellow pages to locate one.
w/o you guys/gurls i don't know what to do, i just want thank you all.
you are correct ma71supraturbo
mine is a Non Turbo and if you look at the pic, the line is one male and female end.
the female end goes to the hard line and the male end goes to the slave cylinder.
i was thinking since the clutch line is both female ends i could just find a brass fitting...
it has a different end than the turbo one.
I was wondering if it is okay if i get the correct brass fitting (both male end) to connect the two female ends(one of the female end is in the pic and the second one i am referering to is the slave cylinder)?
would the pressure of the clutch cause...
i searched on this forum for anything that has to do with SS clutch line and found nothing.
i want to replace the soft hydraulic line that connects to the slave cylinder and the metal hydraulic line connecting to the clutch master cylinder.
i ordered one from the dealer and twice i got the...
you don't want to go thru that with the modified 5.0 rack.
you will be driving like superman(strength to turn steering wheels). if your p/s line is not leaking you don't need to change it. Its my 2cent on the p/s rack, whatever suits you.
i just think toyota is trying to rape you for all the...
try emailing curt at elmhurst toyota or jeff at champion toyota.
the price should be cheaper than your toyo and i think they can ship it to you faster if you willing to pay a little more.
when it is coming out of the weep hole that means the water pump is done.
get a new one, it prob. take you no more than 1hr 30min to do cause you have to drain ur coolant and then burp the system afterward.
Make sure your front is jacked up cause the coolant from the water pump hole will...
toyota is the best bearing and yes it is little more expensive
you will get the correct bearing for each individual crank and connecting cause they have different thickness to it.
clevite is standard so you won't be able to match the right bearing to the caps on the rod or crank.
great pics man, you should frame those pic and write the date on it.
glad you found your car and man the cops should allow you to beat one of them just for all the trouble you and your family went thru.
one thing for sure with this experience is that you realize theft was not part of the...
you might want to change your oil a couple of time to get rid of the lucas oil.
it is no good and i can't remember where is the website for the oil comparison with lucas and regular oil.
i think someone on this forum might able to link you to the site.
i say tigthen up those tranny bolts
just slowly tigthen them if the spline are sitting correctly.
that is the easiest way to put it back on.
i had the same prob. with the w58, just slowly tigthen the four bolts and it will seat back in.
do a search and you could find a lot of places sell a performance rad. well it is a little bit better than the stock.
if you got the cash go a head and purchase one of the few name brand rads. all these member is naming.
probably, i am not sure what is the correct term to use.
all i know is after a 10mile drive or so and i open the oil cap i see like a load of vapor, steam or whatever you call it.
in SF i was it was excessive blowby, but i don't think my piston rings were bad cause i let the car idle for...
does anyone know why i see steam coming out of the oil filler hole?
i had this problem before i took my motor out and right now it is in the process of a rebuild.
my compression is good, steady thru all 6 cylinder at around 180psi.
i searched but can't find any info. and the only thing i...
i went and ask a mechanics shop and they will be polishing my crankshaft.
don't want to end up ripping apart the motor the 3 time(i don't think 3rd time is the charm). Bringing it to them tomorrow early in the morning.
i took the crank out and the connecting rod looks like it need some...
Thanks Tony
I am not definite it is showing wear.
I am only half way to tearing down the engine.
I only took off two of the connecting rod bearing.
I understand what you mean Tony and thanks for the input.
I am getting the crank mic'ed today and see if it is worn down.If it is i will...
i would like to know how to clean the crankshaft prior bearing installation.
i do not have a rod not but the journals on the crank are showing showing some wears.
i can't get the crank to a machine shop cause i have no other car and no machine shop around my house.
what can i do to prep...
i need some info on the part number for clevites 77 bearing for a 7mge.
i did search but most thread did not state the part number, i have to replace main bearing and rod bearing since my engine is out.
i found the part number for the 7mgte in FAQ and some sites for the part number for the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.