Search results

45 is bad try stay 35-40

935 haves the same manifold and you need to use bolts on the bottom.

convert the motor to mechanical or electrical fan pull your harnes through the speed hole instead of extending it upgrade the Y pipe or go single while the turbos are accessable buy your engine from driftmotion or C&T japaneese engines ontario ca ask dennis for a good deal tell him how i...

have you fixed the recall on the 7m yet ? if not you can pull the head off and oil pan take a peek if it is like a rolling or scrapping noise it may be your flex plate bolts at the back of the crank i had my flex plate shoot off on my mkii and the bolts shot throught the bell housing like...

Use the really old microwaves with a dial turn the dial on then plug in the power on the extension cord that way you are nowhere near these things when they go off! try a stick of dynomite for kicks

considering the fab work its not worth it there is plenty of 6 speeds that will work i only heard the turbo A diff is close to 320 but may just be a rumor and if so only 500 of those were ever made.

yep there is 3 marks on the tensioner 1 on the tensioner 2 on the bracket put the 1 between the 2 and your good

lol 6 speed you can not go 6 speed with a mkiii supra using the v160 no rear diff gears will work for this only option is tremec richmond zf6 t56 and gm 6 speeds the mkiv supra haves an extremely tall rear diff mated to really low trany gears

timming belt just use a 24$ isuzu belt works great and as long as you dont go to hi on lift you have non interference head anyways.

yes the auto store also haves diffrent length belts in my case custom because under drive pully kit and deleted AC

there is C&Tjapaneese engines here in california dennis 909 923 5588 dont forget to get all the 1jz parts to make it work the bell housing the turbo tranny manuel the bic mounts if pre 89 extra moneys to spend

paint remover ?

how about a 2jzgte in a old school datsun 240 like a 73 to dodge smog crap they put a 350 ls4 into these with a kit but they also bolt in 350's into supras with kits why not go 2jzgte 240 call it a 2J4Z0-GTE tune 800+ hp out of the little car it would be a rocket.

great work. hmm you could try jaws gear for the drive shaft solution forget the 7m in the solstice put a 2jzgte with a 1jzgte bell housing in the 2007sky or 2007opel gt lol hmm then tune the engine up to 1400 hp in that little car lol blow S2K's off the road like dirt. also since the...

how about the fit of the altezza beams TB ? it is about 3" and toyota? will it bolt on ?

factory is crapy like the 7m around 80 i think calculate your sterio and your load to ampers and try to stay below 75-80% your laternator peek or your car die at idle and you kill a lot of alternators you can get a lifetime warentee at kragen autozone sc300 one is best 110 amps other then...

SC300 110 amps and direct fit! I wish i knew this before i bought a 93+ 2jzgte 100 amp one you also have to change the alternator connector if you go 2jzgte one SC300 is plug and play no mods neaded!

so let me get this right! The studs rub because they are too long so all you have to do is pull the bottom studs out and bolt it in ? cool deal!

Lol you have 3 supras and 3 are bad you know what that means!!.. buy another 1-2 of them and maybe out of 5 you might get 1 running keep buying more supras until you have 1 running! How can you resist to tow them out of peoples back yards and even have them pay yout to remove it...

get Tien i love them i was going to buy hks or tien at the time tien way better! the best in my book go for the most agressive ones RA's or hypermax