Search results

cant wait to see them chris. I am sure i will want some now.

Boost controllers can not lower your boost below what ever your waste gate spring is set at. If you shim your waste gate it has nothing to do with fuel cut other than allowing the boost to build up to the point to that point of course. All manual boost controllers are not worth the money. You...

I have a 90 with abs and i need to replace a broken hub bolt. I have looked at the trsm and want to know if i have to disasemble the axle hub from the axle bearing to get the bolt to clear the abs sensor rotor. I know without abs it is much easier to punch out the stud and replace. Do i...

that wire is the one that will receive 12 volts when you turn on your a/c. There is one wire coming out of the loom under the fuse box at the battery. this goes to a relay that i think is in the fuse box that will supply 12vlts to the a/c clutch. There is a 25 amp fuse in the passenger...

thanks again bluepearl

well the oil is caking up on my spark plugs and i am betting carbon build up on my pistons. I would like to eliminate this problem and keep my chambers clean. I guess i need a rebuilt turbo or a complete new one.

i pollshed the shaft and especially at the bearing and seal area with a cross buff of very fine. The old seal wore a trench into the shaft and polishing it up helped to get rid of it. I will be so happy to get rid of all of the cps leaks so for when i switch to synth oil. What kind of pin...

i removed the egr system from the car. I do think it is the turbo seals but i am wondering why the oil is so collected in the lower intake and not elsewhere post IC. I guess the oil is not condensing till that point.

what do you mean the throttle plate? I guess from oil deposits. My new 2000 mile pistons have some carbon build up too.

I removed my intake and noticed a good bit of oil in the 3rd runner and coating of oil in the others. I just had this engine rebuilt and the head too. The engine runs good. The car does smoke some at idle but not under throttle. The IC pipe from the IC to the throttle body doesnt look like...

ok it may work

I finally figured out how this works. I was afraid i would need to remove the bronze looking piece in the back but it is just the bearing and bearing seal. My seal was cooked hard and cracked and upon removal it broke up like a cracker. I had to slam the shaft down on a board to get the...

how will you know if each wire you swap goes to the same devices or inputs or outputs? The wiring may not be arranged the same way when they switched plugs. The wires i am sure are different color codes which means they may do different things and it is a risk just to switch plugs without...

Well i finally got around to taking the gear off. The shaft doesnt come out easily and so i came back to read the rest of this thread. I ordered a spare cps in the mean time. I will be trying to separate the shaft and bearing. The surpraforum thread on the bearing is most helpful but it...

the 89 harness is a weird year. It can even make a difference in what month of 89 your car is. If one of the extra plugs is a white long plug with two rows of pin holes it is for the air bag. I think the 90 has different size plugs for the ones you are talking about so you can not use the...

good to see you break sections of your car all at one time. clutch master, clutch disc, and shift fork/trans thats almost a grand slam if you had fried your clutch slave too on the same day.

thanks guys

thanks guys i will look into that any info on how to install the bearing?

i have a leak from inside the cps sensor. The oil is coming out from underneath the gear from around the drive shaft that goes thru the housing and has the gear on the end of it. The oil is not coming out from around the housing that the O ring seals off. The oil can be seen dripping down...

I have been wanting to get this plate for a while but had other things to buy. The GB made me get it now. Its a very nice piece. Great group buy. Thanks to everyone who helped this come about.