Search results

you can always keep in shape from eating those burgers by pushing your supra thru the drive thru.

if you have a mhg gasket and arps i dont think you need a retorque. What error in the gasket to deck fit are you trying to correct with a retorque? If the aluminum head is forced down into the head gasket it will conform to the shape of the gasket. The aluminum will be pressed in some but i...

no your hp would be the same but your car will go faster cause it will free up hp that used to have to be used to overcome inertia that can now be used to make the car go a little faster.

232 is at the crank and then the drivetrain is a power loss to the ground. then the resistance of inertia also eats up power. The dynojet dynos do not load the drum so all wheel hp is shown on the graph but when you are on the road you will not have that much hp because of loosing hp just to...

Gixx i am sure yours will be back to normal when you correct your timing problem. I bet your balancer slipped and the timing mark is off.

yea i cant believe it lasted this long. It does have some play and it will leave a few drops of oil on the compressor end. For the first 8 or 9 years i owned the car i didnt boost but at stock levels and not that often. I bought the car in 91 and didnt know you could mod it till about 98 or...

Stuff everyone and their grandma has. Have k&n ,super drager, ams dp and elbow, blitz spec R ebc, HPF bronze 6 puck, fidenza flywheel, act pp, ross pistons, swain tech gold coat and pc9 skirt coating, chambers coated. Ported the head myself which increased flow very well especially the low...

I finished my rebuild 3 months ago after taking over 2 years to get it done. After putting 2000 miles on it i went to the dyno. We havent had a dyno in town for many years. I only boosted 11 psi on my stock CT26. The turbo has 217,000 miles on it with no rebuilds. I will get a 57 trim...

I have thought for a while you need cam gears. I probably do for mine too. I will check to see what was shaved off mine. Nobody has mentioned anything about timing. Does the ecu pull timing when it detects something amiss with the cam timing? Got my ebc spec R install today and will...