Search results

:rofl: :rofl:

^^^ I don't under stand what your asking? You looking for a pic on how the hoses hook up to the accordion hose? Or on how just one hose hose up to it with the small vacuum hose on the bottom is hooked up? All I have is this pic of my old set up with the BOV port blocked , Im still running a...

^^^^ Wrong area. You can make a thread in the feedback area, but chances are that Mike will just lock it any ways. Or keep calling and emailing them. This is NOT the right area. This thread is about the up coming meet. If you want you can come to the meet and talk to them in person if you...

They need to be back into the same area before the turbo, If keeping them. You could get rid of the IAC hose and just put a little air filter on it if you wanted and vent the BOV to the atmosphere. But the PCV system needs to be routed back to the intake unless you also want to just use little...

I'll try not to ;) One nice thing about it is that it's about 1" thinner so Ill have a little more ground clearance.

Today, I got the old lip out of there and the new Toyota lip is installed. The lip fits AWESOME, to bad the bottom of my bumper isn't the straightest in the world, but over all it looks good. It just isn't 'tight" on the left side below the fog light area. Also install a new left side support...

Im I the only one that stores a (my) supra with a full tank?

Really!!! OK FUCK YOU. noob both of you ;) Why the fuck would he ask the question when it was already answered. Plus that was over 6 months ago On second thought, PLEASE, PLEASE, PLEASE, install it like they show and PLEASE have it touch the 12V + post on your alternator. So you car...

You guys think he is getting hosed? Well if he is paying a shop to do the work 2200 sounds about right. Depending on the labor, that can be 80-120 a hr. Then add in the mark up on parts, 2200 sounds right. When I bought my sup, I found a receipt from toyota that showed a $3000 + repair bill...

This afternoon, I installed the new sensor, and finally removed the front bumper to re mount the duct. First I remounted the studs (hope it holds this time) then once it is "bolted up" Im going to put another layer of fiber glass to make sure it doesn't come loose again. But since this is my...

What the FUCK dose that have to do with a relocated Power Steering Reservoir???????????????????? noob. To answer your question before this thread now gets locked, yes it "can" rub, and yes it will make your supra a car-b-que. You just need to use common sense when running your new fuel line...

If you want to get by on a budget you can do what I first did, before I upgraded my system. I drilled a hole in the center of the mounting flange and hung it in front of the hood lock. Then just pick your self up some 3/8" fuel line (like .75 cents a foot) to reach the new mounting location...

Thank you again. Hundo Drew pulls threw again, with a fiber glass repair kit this time. Now time to remove the front bumper again, to make sure the replica turbo A duct doesn't come loose and FG it in place. Also the mail woman dropped off the correct cold start timer switch I needed. I...

That is about all that has been done. Just mock up. I have seen the tooling to make them, the plastic and metal prototypes of his FFIM, but the casting plant wanted way to much $$$$$ to cast them. The story kind of goes like this cliff notes ; Lots of steam at first( R&D), tooling...

Yep I have seen several just on one shelf, with others still in the package from the casting plant. When I was at Greg's shop (suprasort) ;)

Ya you can either buy a new (used) tank, or replace the sensor. Take a multimeter and test you old sensor first to make sure it is the sensor and not the wiring. Just see if there is continuity when the float is down. It is pretty much just a on - off switch. I have had one leak (on my first...

The only real advance is with fans you will have better cooling from 0-20 (or so) MPH. Other wise at speeds above town driving you will get more CFM's with air flowing threw it naturally. That is unless you mount the cooler in a place that doesn't get air flow. IIRC IJ used fans on his...

^^^ Sounds good. I guessing it will be Saturday since you stopped by today and didn't have it.

The nickel plated washers stay then. As for being any benefit, I don't think so. There is a rubber strip under the hood to stop the air flow already. All it is pretty much good for is holding tools or if your into them, a place to put stickers. But stickers isn't for me anymore unless there...

No pic no water. :p JK I hope you don't get flooded out this year. It is setting up to be a bad flood year for you guys up there along the MN river :cry: Start filling up the sand bags now! It has also been raining here for for the last couple days. But the supra is high and dry.