Search results

  1. I

    Planning 2014 Standalone Upgrade - Question...

    Do you still have the squashed cast elbow in the IC Piping?
  2. I

    how do I get oil INTO my diff?

    I used to use the plastic bottle with the tube nozzle in the cap, I had some -6 hose that was a tight fit I then put that into the diff fill hole bought it out over a rear tire, I stabbed a small hole in the bottom with a scribe and turned the reg on the compressor down to 1>2psi and used the...
  3. I

    7mgte no Thermostat Safe?

    Will run cooler in traffic but slightly hotter at highway speeds with the rear edgo of the hood up/unsealed. As for the TStat verify it's opening temp BEFORE fitting it.... just been through all this and out of 3 stats I have only 1 works consistantly the other 2 exhibit weire fluctuations in temp.
  4. I

    Project Git 'er done!: Stages 1, 2, 3,...NOW FOUR!

    Button head FTW ;) Think from memory I had to shorten the lockbolts in mine as well.
  5. I

    Cheaper Alternative to Engine mounts 89+

    Agreed 100%, there's a bunch of bits for my 2004 car that are inpossible to buy new..
  6. I

    Cheaper Alternative to Engine mounts 89+

    Don't make me ban you young fella ;)
  7. I

    Cheaper Alternative to Engine mounts 89+

    Yep my cars are a 2004 and a 2005 and a HUGE leap forwad to the last Domestic I owned :)
  8. I

    Cheaper Alternative to Engine mounts 89+

    Volume production... Since leaving the Mk3 world and running Domestics I'm constantly AMAZED how cheap parts are, I'm talking 1/10th what I was used to paying for the same Supra Bits!
  9. I

    Project Git 'er done!: Stages 1, 2, 3,...NOW FOUR!

    Yep can't think of anyone in Modern times that Mirror polishes intakes (or exhausts for that matter as they stay polished for about 50 miles)
  10. I

    Project Git 'er done!: Stages 1, 2, 3,...NOW FOUR!

    High polish on intake ports is bad....
  11. I

    Hole in 2j block what to do?

    Grab another block and start swapping/rebuilding.
  12. I

    Planning 2014 Standalone Upgrade - Question...

    17 is very very lean.... or the Sensor is poisoned and is reading incorrectly.
  13. I

    Furious But Lazy 7M owner who gave Up.

    What Diff ratio do you intend to use with the 160 that will allow you to use 1st/2nd?
  14. I

    Car is Cranking but won't run

    Most of these kids are seriously lost now... Both my current cars are OBDI/II and are an exponential leap in complexity, one is a 2004 model the other is a 2005 and just in that one year span the later management system is twice as complex....
  15. I

    I picked up a 1997 SC300

    Going for the "Iceberg" theory that 75% of the ugly is below the surface huh?? ;) BZZZZZZZZZZ wrong!
  16. I

    7mge quarks...

    ALWAYS ran +1qt after losing a GE under brakes on the way home from Sydney.. Just fill it till it's full on the Dipstick then add a Qt redip it and mark the stick with a new full mark... not exactly Rocket Surgery..
  17. I

    7mge quarks...

    Ditto!
  18. I

    Cheaper Alternative to Engine mounts 89+

    Bet they're NOT $30 though ;)
  19. I

    MYTMK3 6th times a charm HG thread

    The Tin plate?? If so it's just a cover, doesn't need to be touched.
  20. I

    MYTMK3 6th times a charm HG thread

    Should pay someone to do it right then ;)
Top Bottom