Search results

  1. OneJArpus

    JDM 2jzgte oil sludge pics? Should I keep this motor?

    my motor from driftmotion was hella clean.
  2. OneJArpus

    She's going to the dyno so its time for a guessing game!! :D

    nice numbers :), was expecting a little higher but i dont know much in guessin LOL
  3. OneJArpus

    MKIV power steering pressure line ::1jzgte::

    i had the same issue when i had the 2jz line, i just ditched it and went with a driftmotion line. 10x easier to install.
  4. OneJArpus

    Answer the question with a question (now NWS, with goats!)

    is it worth finding out the answer?
  5. OneJArpus

    Questions concerning Fuel Cut

    I don't think injector size will prevent fuel cut. But the amount of boost pressure the Map sensor gets. It is a 1 bar map sensor so it is limited to 14.7 PSI it can see. Anything about that I think is what triggers the fuel cut defense in the ECU
  6. OneJArpus

    Questions concerning Fuel Cut

    hmmm interesting, i'm wondering could i possibly wire in a GM Map sensor with the stock ecu. Sucks as i pd for a new hks fcd the same price as the GBCC.
  7. OneJArpus

    Questions concerning Fuel Cut

    I have a 1.5JZ Swap with a T61 MP Turbo (.68 AR) 550 inj, AFPR, Walbro FP, no dampener. I have a SAFC, Innovate LC-1 Wideband, full IC, 3'' exhaust, 264 hks cams, and stock ECU. I've heard that the 1 bar map sensor for the 1JZ sets the fuel cut at 14.7 PSi. I want to run 16-18 PSI. How would i...
  8. OneJArpus

    1JZ Body Plug Harness Help

    IIRC the same but i'm not 100% sure.
  9. OneJArpus

    Who did you get your 1JZ swap from? the good, the bad?

    Look at the vendor section. He has his own section. His name is Jose, he has the Soaupra how ever you spell it lol
  10. OneJArpus

    Help me out

    IIRC the waste-gate needs a boost reference. IE line from compressor side of turbo to waste-gate.
  11. OneJArpus

    Tuning a 1.5jz with a S-AFC. What would be a good base tune?

    I've got a similar setup but i have AFPR & LC-1 wideband i got brand new, look in the forsale thread you can come across used wide bands or try out our vendor, he has AEM Eugo's for 184 shipped or lc-1 for 199 shipped no gauge. Get a wideband or borrow one before you start tampering with the...
  12. OneJArpus

    88 Supra - Project 1J

    Thanks man! New to the List Wire in HKS FCD Purchase & put together boost controller
  13. OneJArpus

    1JZ PS feed/suction hose?

    I ran a straight hose and i do not like it but i had to deal with it. if you find out how much it is let me know
  14. OneJArpus

    Would i get back what i invested?

    Incorrect, some cars are investments. Not MKIIII Supra's. A MKIV Yes! But must be completely stock well maintained if found for cheap. NO aftermarket parts will increase value. It in fact reduces it as its a personal touch to the car.
  15. OneJArpus

    88 Supra - Project 1J

    Slight oil leak on oil return line and its slightly touching the wrapped manifold, so i have to move that, i have to find a better location for feed line as under the cover it will be touching important wires. Next on the list Install Innovate LC-1 Wideband - DONE Install APEXi SAFC - DONE...
  16. OneJArpus

    88 Supra - Project 1J

    Well 5 months later! I think its time to revive my build thread. First I got rid of my parts car, cleaned up my work area. Then had my baby towed there. Just a few pics of how it sits now. More pics and details of what has been done will be added this weekend and during the week.
  17. OneJArpus

    The "which o2 sensor" thread

    check rockauto for an o2 its like 29 bux, stock 7m aftermarket brand