Search results

  1. OneJArpus

    RSX Seats in an MKIII

    They just bolted right in. I can adjust them although it is limited as they sit higher then the stock seats. I can not fully recline the seat back as it hurts the top part of the back pc where the targa mounts too and i can not fully bring them forward as it hits the windshield. My boy wanted...
  2. OneJArpus

    RSX Seats in an MKIII

    Traded seats with my boy RSX leathers for stock Supra seats. I'll see how they feel once i put some HRs in them. They fit but they are higher then the stock seats. I like them so far we'll see once i get some seat time in them
  3. OneJArpus

    in the market for a short throw shifter for my MK3

    My friend lives in china, he got a C's from the manufacture for 120 bux.... tried to buy more but RHD purchased the remaining stock. C's is now discontinued from the manufacturer per my friend. only available thru sellers. I would have purchased one when he first got to china if i knew that...
  4. OneJArpus

    Can the ABS be removed like this? should I?

    I have ABS on my car and I would not remove it. Does its job. :) Some may argue that but hey proof is in the pudding. ABS supra stock vs stock non abs will stop better
  5. OneJArpus

    in the market for a short throw shifter for my MK3

    How much are you looking to spend. There are a few C's - Expensive and getting scarce to find, RHDjapan.com does have them but IIRC $300+ dollars NashMan BeechPerformance .... these are the only 3 that pop into mind atm. DO NOT DO THE SOGI mod. Drove a car with it, IMO it is SHIT i rather...
  6. OneJArpus

    i think i may have lost the bug

    Ditto.... im getting tired of it. I think because I haven't driven it much.
  7. OneJArpus

    new rack and pinion but still has issues

    Does this have PPS? Just curious, I took my steering stabilizer off. When i installed a new rack, for some odd reason the stabilizer does not mount on its mounting bracket properly. I'm looking into the issue but its not on the top of my list. I'm not 100% sure what would cause turning right a...
  8. OneJArpus

    ECU in factory radio location.. will it be affected by an aftermarket radio?

    I did this no issues, be sure to run a ground to the ECU to the stock location just so you know its grounded properly. I now have it on the passenger side floor right next to the dash and i'm building a box to protect it from people's feet.
  9. OneJArpus

    power steering problem

    Check the fluid again in the morning and see how it looks. If its good, i would assume that the PS pump went. I would recommend a new unit, but if you need a used one I have one with 100K miles on it. I work at a shop and I can get you a new unit for a decent price. PM sent, make sure you need a...
  10. OneJArpus

    engine help

    Get a ATI uni, its a little more then the stock unit but well worth it. Steel is perfectly fine to use as well.
  11. OneJArpus

    Recalibrating stock guages

    i would think pulling the needles and placing them back where they are
  12. OneJArpus

    1J swap Tach not working

    From my understanding, a turbo tach is needed to work with out doing anything to the tach that is IF all the other wiring that was done was done properly. NA tachs IIRC need a lil wiring to work
  13. OneJArpus

    1jz boost cut?????

    ^I agree with the above advice! I wasn't hitting cut til 13/14 PSI with y pipe and 3'' back w/ filter. Normally at 12 creep to 13 n on cold days 14 boost cut BOO!. I did have a break up, and i gapped mine to .026 n it worked out just fine
  14. OneJArpus

    2jz Coolant hoses to heater/firewall

    yea i've seen those coil things but they are like 10/12 bux, a few worm clamps do the job, i still have heat if i need it and if i dont want to use heat just use the climate control unit to 75 to get ambient temps to come thru
  15. OneJArpus

    2jz Coolant hoses to heater/firewall

    I by passed my vavle, by running a hose from the coolant pipe to the heater core, It was regular straight hose, i got it long enough so i can put it on and where it started to Kink a little i put 3 hose clamps snug on the hose to prevent it from collapsing
  16. OneJArpus

    1jz slowing losing volts....

    Look into the wiring ASAP. Do not go on long drive, short drive, or even drive it. Source out what is going wrong with those wires and why things are melting. IF you do not at least LOOK into it and see if everything is wired up properly. You are going to have a fire and cry about a burnt supra...