Can you post up close shots from different angles of your engine bay/engine?
Seems like stuff needs to be corrected.
TPS could cause the issues you are having but I'd vote map sensor over TPS as I have unplugged the TPS on 1JZ and 2JZ and it doesn't do this.
Calibrate it, doesn't hurt.
This guy Jetjock seems to act like he knows everything or maybe......;)
OP, 7M don't have true check valves, just an orfice. It wont be an actual boost leak because its not a huge hole. Keep in mind, it works perfectly fine.
When I had my 7M, I have the PCV hooked up AND it was done like...
Easy.
1JZ R154 Flywheel
Three dowel pins are in the middle of two holes for the pressure plate bolts.
1JZ W58 Flywheel
The three holes for the dowel pin are closer to the bolt hole for the pressure plate.
R154
W58
Ian knows about these well, he'll chime in.
Sure it has fluid? Sounds dumb, but could be a possibility.
Here are some options from the TSRM.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=AT&P=10
Prosport gauges just get plugged into the gauge. The only thing that gets a ground is the power/ground harness. Obviously, only the ground wire is what gets grounded, not the power wire. I can't remember exactly if they were separate harness with the sensor harness.
So now, you just plug in...
Yes. You can't put someone's car in the magazine and then compliment it but your last sentence is an insult.
Just don't include the car in the first place...
http://weirperformance.com/maxgriplsdkits.html
Go there.
They sell rebuild kits. I am sure you can do it yourself using the TSRM. I believe Steven, Toyotanos, plans to get their kit so you might want to PM him for some tips as he MIGHT be rebuilding his soon too
Did you pull all the plugs and then cranked it to get all the fuel out the cylinders? Make sure to pull the EFI fuse when you are doing this...
Like 505 said, are your plugs fouled? Get another set if they are. If you can't afford it, try to clean them at least. Don't use any abrasive...
I feel like a caveman trying to come up with ways to have you test things when you didn't want to buy a pressure tester and use a little ingenuity. Tone it down a little bud.
It doesn't want to start now. There is a reason it was hunting and I am not sure why you had terminals jumped when it...
Where are you located? "D Town" is not a good description.
Ok, so the flow is much better now, correct? Have you tried checking codes now that it was running?
Sorry, there was typo, it is E1/TE1 that have to be jumped.
http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx
Have you...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.