Had the injectors cleaned still has a misfire. I checked to see if the intake valve seals were lealing any oil down the valves. I saw none via inspection camera. Dunno about the exhaust side. As I mentioned though head was rebuilt. I'm out of ideas any suggestions on where to start next?
Also I...
Makes me feel like Ive been here a long time (even though I haven't) to remember reading that when I got my car in '07
http://www.suprasonic.org/public_html/sonictech/mk3/mk3_pmtn.html
The wires checked out even tested with a spare ngk and oem set. Misfire persists. Swapped coils around just for kicks. I'm pulling the injectors off to be tested and cleaned may as well and it certainly wouldn't hurt.
So my rebuilt engine is running great a compression test this morning showed great results. Anyways its got this annoying misfire that I finally decided to at around 300miles to pull the spark plugs and see what the deal is. All the plugs except #4 looked good. #4 looks like its running rich...
Ok so I'm currently breaking in my built 7M and its on a diet of straight 30W ran Rotella T1 for approx 500miles now its running Castrol HD30 until approx 1000miles where I plan to switch to a conventional 5W-30. The oil pump has been shimmed approx 3.5mm and it has a full flow oil cooler setup...
Its not missing either guide I checked that before I put the key on. The guide on my old one that used to be on my motor was missing as it would walk on the gears bad. This one just moved slightly on the tensioner and stopped. Didn't even move up top on the gears.
http://static.photobucket.com/player.swf?file=http://vidmg.photobucket.com/albums/v436/Cobra281s/20130528_093514_zps25c6d36d.mp4
Ok so my belt stops walking at that point mentioned in the video. My question is since I know I'm rotating the motor on the stand. Will the belt track straight once...
I wouldnt call it a replica at all. That spoiler is its own original as its molded to the stock center piece wing. The Hiro Double Stack mounted to the two end pieces on the quarter panels (also my favorite 89+ spoiler). The Trust Gracer spoiler was also different. Both spoilers are quite rare...
The only head gaskets that ever matched the block were Trust head gaskets. I'm told they were the best for the 7M some argue better than HKS. They are discontinued otherwise I would've ran one but I'm running a stopper and I'm happy with the quality.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.