Search results

  1. JDMMA70

    Factory toyota coating/plating on steel parts

    Its Zinc Plating and Yellow Dicrhromate Coating
  2. JDMMA70

    Help identifying cat back pls

    Ill look through my jdm catalogs
  3. JDMMA70

    Help identifying cat back pls

    That canister looks similar to the ones found on ebay, cx racing cat backs. Only this one has a resonator.
  4. JDMMA70

    Tokico Illumina IIs

    Those are the ones. My illumina iis have the same part number on the box.
  5. JDMMA70

    Tokico Illumina IIs

    http://thmotorsports.com/store/product/itmgroupdetail.aspx?groupid=50358&make=TOYOTA
  6. JDMMA70

    Water By-Pass Hose #6 / Union Leak

    He's talking about the one under the tstat housing.
  7. JDMMA70

    Water By-Pass Hose #6 / Union Leak

    If you're bent on taking it off to inspect it before you do that do you know znyone that has an inspection camera. Those are useful for looking at stuff you can't see. At least this way you know what the culprit is before you start removing stuff. I cleaned up my unions l via sand blast and then...
  8. JDMMA70

    Are there any companies that...

    Make a Intercooler piping kit for the stock IC routing that doesnt look like it fits like complete ASS? i.e. CXRacing and the other eBay piping kits? Sure it may work but it irks me when something doesnt fit the way its supposed to...
  9. JDMMA70

    Ac compressor not kicking on

    Did you vacuum out the system with a pump? R134a doesnt like air.
  10. JDMMA70

    Ac compressor not kicking on

    Brown wire and light blue iirc they are across from each other.
  11. JDMMA70

    Ac compressor not kicking on

    If there's low charge it wont engage and if its low you have a leak.
  12. JDMMA70

    Experts - take a look at this bearing

    From my research as long as you don't grind past 10 thou you're ok. If you do need to go further undersized then it would be wise to re harden the journals. With only 10 thou you've still got some hardness left. Obviously ideally you'd want a perfect crank. Mine was ground 10 thou
  13. JDMMA70

    ARZ Oil Pipe torque specs?

    Ok new question same thread to keep things simple. I spoke with ARZ about the oil supply line and how tight the nut to the block should be. The reply i got was So upon looking up in the TSRM which was not very clear how tight it should be for the nut to the block. I came across this...
  14. JDMMA70

    How are your stores ammo shelves looking in your state?

    I'm waiting for 5.45x39 to come back in stock at my local stores
  15. JDMMA70

    ARZ Oil Pipe torque specs?

    Oh cool sweet. I know this sounds obvious but just to clarify these go in between the pan to act as a spacer correct?
  16. JDMMA70

    ARZ Oil Pipe torque specs?

    When I purchased my crank scraper it came with these 4 grade 8 washers. Can anyone confirm if these washers go on the front timing and rear oil sear cover. I remember IJ said something about stacking washers so the pan is at equal height. Hoping IJ will chime in. Thanks ~JDMMA70
  17. JDMMA70

    How reliable is the 7mgte?

    I find it funny that all of the crap being put on MK3s are from people who bought them 18yrs after the car was launched and expected it run like new. Almost of the people complaining couldn't afford to fork over the coin to buy one of these brand new. When I hear original owners like...