Search results

  1. C

    Would these rims be race or rice?

    Sometimes a wheel spacer is the only way to accomplish your goal. And as long as you know what your doing there is no problem with a high quality spacer. Its that a lot people don't know what they are doing, and when you lose a wheel on the freeway....people can die.
  2. C

    Would these rims be race or rice?

    LOL...I know. Its just a huge pet peeve with me. Every time Dustin or one of my friends say "rims" i cringe. To me every time i here rim's i think a 88 lincoln that is lifted to fit 24's .l
  3. C

    Would these rims be race or rice?

    I have installed a lot of konig wheels when i worked at discount. They all look like crap on anything nice. They have some good looking designs but they still all look like k-mart specials when installed. They do however look good on things like... Hyundai sonatas. or <insert cheap economy car...
  4. C

    Ebony: 91 black 1jzgte (proefi friendly)

    dustins jelly cuz he dos not have a can gauge
  5. C

    Stock internals? How much power have you gotten out of them?

    +1
  6. C

    Pro EFI StandAlone ECU

    Or you could just man up and shred your harness. don't ever look back dawg!
  7. C

    going biger turbo

    Mk4 guys run the map2 and 3 a lot...I have no experience with 2 or 3. Sent from my SCH-M828C using Tapatalk 2
  8. C

    going biger turbo

    Thats the MAP ECU 2...It is EVERYTHING short of a standalone. I was only running the MAPECU V1. Its the red one.
  9. C

    going biger turbo

    I made 500whp on MAPECU for 3 years. 680 injectors
  10. C

    going biger turbo

    I ran a MAP ECU for years with no problems. Alot of the local guys around here are on MAPECU with awesome results.......300 bucks bye bye AFM..... very very tuneable
  11. C

    Stick with the 7mgte or swap for 1jz?

    +1 Sent from my SCH-M828C using Tapatalk 2
  12. C

    7MGTE, Truck Motor Torque Build (7MGTE + GT3071R discussion)

    That looks like a auto trans. Correct?
  13. C

    7MGTE, Truck Motor Torque Build (7MGTE + GT3071R discussion)

    Here is my dyno sheet...240 ft lbs at around 3600. This is a low compression motor about 7.5:1 stock cams stock intake manifold. Turbo i was running on this graph is a Garret journal bearing 60 trim T4. .68 undivided turbine housing on a stock exhaust manifold. Im running a 4.33 rear end and...
  14. C

    Ebony: 91 black 1jzgte (proefi friendly)

    Nice!
  15. C

    7MGTE, Truck Motor Torque Build (7MGTE + GT3071R discussion)

    I would stick to stock cams. The only problem i can think of might be over spooling, you might want to run a very large external WG as opposed to a internal waste gate. You have to get alot of exhaust gas away from the turbine if you want to be able to control that thing. But as a disclaimer i...
  16. C

    Weird issue new battery no power after mhg rebuild

    The ECU dose not control any of the chassis power. You really need to go to Walmart and buy a 8 dollar meter. One that measures Voltage and resistance. After you have done that check for voltage across the battery. If you have >11 volts then try checking from the positive terminal of the...
  17. C

    Fuel issue? Timing issue?

    The timing will move around if you don't have the jumper in. The computer is constantly adjusting it, so don't check timing without the jumper in. Let forget about codes for a sec. Try driving your car in a low gear like 1st and see if you can very slowly accelerate to red line without any...
  18. C

    Weird issue new battery no power after mhg rebuild

    Right! Sent from my SCH-M828C using Tapatalk 2
  19. C

    Ebony: 91 black 1jzgte (proefi friendly)

    That how i feel about people that call me fat............ Sure you don't wanna come to AZ andy????? lol
  20. C

    Project 2.5GT!

    Nice!
Top Bottom