water pump assembly

[mcammarn]

will a na water pump asembly fit on gte 100%?

i stripped a bolt on my current assebly and a member has offered me a water pump, clutch, and pulley from a na.
just not sure if itll work on gte.
i would also you my fan unless i have to get the na fan.
and also whats all those items worth used?

 

[CyFi6]

The fan and fan clutch are different, but the water pump is identical.

 

[mcammarn]

so i could i use hole na assembly on my gte? the na water pump, pulley,fan clutch, and fan.

 

[CyFi6]

No, I think you misunderstood. The NA water pump will work on your GTE, but the NA fan and NA fan clutch will not (they will fit, but the GTE has a beefier fan and clutch).

 

[tonni]

will a na water pump asembly fit on gte 100%?

i stripped a bolt on my current assebly and a member has offered me a water pump, clutch, and pulley from a na.
just not sure if itll work on gte.
i would also you my fan unless i have to get the na fan.
and also whats all those items worth used?

Yes, the NA (naturally aspirated) water pump assemblies can fit on a GTE engine, but it may not be a 100% direct swap. Some differences exist between NA and GTE water pumps, particularly in the number of impeller blades and cooling efficiency under boost. If you're using the NA pump, you may need to confirm compatibility with your existing fan and pulley setup. In most cases, the NA fan should work, but it's best to verify before installation. As for the value of the used parts, prices can vary depending on condition and demand, but a used NA water pump assembly, clutch, and pulley typically range from $50 to $150, depending on the platform and market.