Search results

  1. J

    cutting out and backfiring at 2200rpm

    Have you checked... contact me via text...503-930-7268
  2. J

    cutting out and backfiring at 2200rpm

    Timing..... contact me via text...503-930-7268
  3. J

    1988 supra parts will fit a 1990?

    Does it run? Are shocks and brakes good? contact me via text...503-930-7268
  4. J

    1988 supra parts will fit a 1990?

    I believe the only issue would be the plug on the radio. The steering wheel and combo switches are very different, but I believe most if not all the other parts are interchangeable contact me via text...503-930-7268
  5. J

    7MGTE 1989 Won't Start

    I did...I replaced all the electronics with known good ones...compression way too low, and leakdown was terrible...engine hunting now...got a couple of other projects that are taking precedence now, but as soon as I find the right swap, its on! contact me via text...503-930-7268
  6. J

    Idle issue

    After checking a bit further, I found the can shims were not within spec...fixed them all and it runs much better...someone did not pay attention when they dismantled the head... contact me via text...503-930-7268
  7. J

    Code 12 - 1JZGTE swap MA70

    What about all your grounds? contact me via text...503-930-7268
  8. J

    Code 12 - 1JZGTE swap MA70

    Open up your ecu and look for obvious signs... contact me via text...503-930-7268
  9. J

    7MGTE 1989 Won't Start

    UPDATE: I put the cam covers back on and connected the vent tube. I sealed the end that would go to the accordion hose. I did the leak down test in all cylinders. They leaked from 40-60%. I heard air leaking through the dipstick with 2-5 also having gurgling sounds. I also heard and felt...
  10. J

    7MGTE 1989 Won't Start

    I am going to seal the can covers and the vent tubes and try again to see more closely where air is escaping...I'll update tomorrow. contact me via text...503-930-7268
  11. J

    7MGTE 1989 Won't Start

    Update...just did the leak down test...I can hear and feel it coming from the can cover breathers. Nothing from the radiator, the dipstick, the intake or exhaust...just the can covers
  12. J

    n/a auto to turbo 5 speed swap questions

    I also have a 91 auto shell that was converted to manual. From my searches, if you want to all the neutral start you should find the wire from the ignition switch that goes to the starter. Cut that wire and place each end onto the neutral start switch. contact me via text...503-930-7268
  13. J

    21...91 Red/Turbo/R154/Sun Roof-$old 22...87 Pearl White/Turbo/Targa/Auto-$old 23...88...

    21...91 Red/Turbo/R154/Sun Roof-$old 22...87 Pearl White/Turbo/Targa/Auto-$old 23...88 Black/NA/HT/W58...1J swap $old 24...89 Ice Blue/Turbo/Targa/5speed-$old 25...90 Ice Blue Cressida...5speed swap-$old 26...89 Blue on Blue Turbo/Targa/R154-stripped/scrapped 27...89 Burgundy...
  14. J

    Idle issue

    Update....Ok, I replaced the TPS, cleaned the IACV...that got rid of all the codes, but it still did not really run right and the idle was really high when warm, about 3000, but would drop if the throttle was punched, but then go back up once driven. I did notice a timing problem. The exhaust...
  15. J

    7MGTE 1989 Won't Start

    I've not had much time to investigate...I think I'm going to swap it out and put in a 1j...
  16. J

    7MGTE 1989 Won't Start

    I agree they are bad...I would not think that a hg could fail across all cylinders overnight....but I could understand if the head cracked or some other catastrophic failure
  17. J

    7MGTE 1989 Won't Start

    I have exhausted all diagnostics except a leakdown test....scheduled this week
  18. J

    7MGTE 1989 Won't Start

    I have run the compression test 4 times.... thought my gauge was bad so it was done with three different gauges...first time dry...probable fuel soaked...then with injectors unplugged and added oil...the numbers were 100,60,70,80,60,70
  19. J

    7MGTE 1989 Won't Start

    UPDATE....put all the electrical to gether, put all the intake piping back together, made sure the battery was fully charged, made sure all the electrical components were within spec with a DMM....I have gas, spark, fuel pressure. Checked all the timing related parts and they are all lined up...
  20. J

    7MGTE 1989 Won't Start

    PI...I can clearly see the colors on both sides of the clip, I was more concerned about whether to match colors (as I have read some do) or to them as listed in my last post. I think the listed matching is correct. I am putting all electrical parts back together to see if it now has spark and...