Search results

It depends which style bushings you have BIC or others. The BIC bushings are actually spacers that replace the stock upper plate bushing, our lightweight solid nylon bushing sandwiches between the subframe and the chassis making a tight solid mount. The factory bushing remains in place in the...

If you are running any aftermarket sway bars it is a good idea to upgrade the end links.....but that will increase the load on the lower mounting tabs causing them to break. Good thing BIC Performance has weld on reinforcement tabs to compliment our HD Teflon lined adjustable end links. They are...

For $450 shipped the have to be good....... you get what you pay for.

Manual steering in these cars sucks!!, these are not light 240sx'.

I have the NightPager kit with 350Z rotors, the brakes work amazing!!. I would use the 350Z rotors, as the 300zx rotors wont be any better than the stock rotors, infact I belive that they are smaller than stock. The increased rotor diameter and thickness is what make a BBK upgrade. The incresed...

All the Ebay / DM downpipes are all the same part, all made in the same factory and all direct rip offs of the original BIC DDP, some companies just throw thier name on it. Quality control is terrible on all those pipes where as at least 2 out of ten are not even usable. Those wastegate divder...

Candy and stock paint are two totally different animals. I did all the body work on Tekdeus' widebody car. Candy paint is very expensive and almost twice the work. I would guess a full candy paint job would run in the $5000-10 000 range minimum. Being in the industry I also know that is is...

Estimated 175 MPH at at track a few years ago...The needle was pointing to the B on the "brake" light in the dash. At the time was a 7M with approx 400 whp, 60 trim T4, and BPU.

Yes my first. Still trying to get some sleep.

Nice work!!! My son is only 3 days old now, so its gonna be a while before I can contribute to this thread :)

Yes they will bolt on. With the Turbo R springs it sits about the same height as Eibach springs. They ride very nice, and also handle great, a great street suspension.

BIC Performance has stepped up and made some Targa Bars. We made a batch last summer, and will be making another batch shortly, will probably get a GB going this time around.....also of the nearly 100 people that said they were interested only 4-5 bought !!!

Yes the blocks are 1/8 BSPT, standard 1/8 npt "fits" if you crank it on but is not the best idea. We always use the Autometer #2269 adapter fitting which threads properly into the block and the npt line properly into the fitting. Randy

Old subframe bushings can also be a factor if all your arms and bushings are in decent shape, my wheel hop was eliminated once I put in some solid subframe spacers, this lead me to start a Group buy and offer these to everyone else. I may still have a few sets around... If you want to see how...

Again you get what you pay for. They are just universal brackets, you will have to bend / shape them to fit and most likley make a second set. Typically when we install IC cores I like to use two of the bolt holes on the bottom of the rad support (that originally hold the undercover on), these...

RPM is Canadian mag, I dont think the US gets them.

Nice work Duane, two mags in two months!! I finally found mine at Chapters

The 1jz P&P kits are still available, they are just a special order. PM or email us for details.

First of we did not have a fire, Adrenaline Motorsports did have a break in and fire that closed their shop. Yes we are still around. I did recently close the "shop" location down, but the parts fabrication and online store is still growing strong. For the time being we will continue to offer...

I dont know why you would want to delete the PS, 3500 LB cars with manual steering are terrible. I have driven a few mk3's with manual steering....no thanks not for me. I like my one finger steering and cold AC as I cruise down the highways.