Search results

Want to make sure I'm clear on this one.. What do you mean "do a scan" are you referring to checking codes?

I am kind of on the same page as jetjock.. I had those lights show up on me before. I was driving down the road and flash..flash.. flash.. all 3 at the same time.. Man I thought my car was going to blow or something.. I know the feeling.. The 3 wire plug that connects to the alternator had...

I found the ac amp.. holy crap!! is that behind the dash??

No your right.. It is high around 900 until it warms up.. Where are the amp connectors? I really appreciate you staying in on this post and helping out... It is like 98degrees here... My damn manifold temps are like a 100..

I have an 89 and I will start with the ECU voltage check. I did hear the clutch come on and AC light.. I don't see much fluctuation with the defogger or headlights though..

I went ahead and set the TPS that if I press the gas really soft it will throw a 51 and when I let off the gas 51 is gone.. When I turn on the AC no 51.. As you and Nick said.. So I am taking it that there is no signal. What wires should I check? I can check the connections at the ECU but I...

Dude.. It might be easier for you to come by sometime and see what you need.. I haven't taken much stuff out. But somethings are not in the best of shape either.. Like the dash is shot. Seats are not the greatest either. Backs are pretty good and I think passenger is good.. Car is Bugundy...

OK.. I went to the tsrm and I will do the thickness guage adjustment. .50mm=continuity .90mm=no continuity.. I checked codes and when the ac is turned on it did not throw a code.... Possible issues: TPS is not adj properly. Not getting a signal to the ECU Is this about right...

I got you on the ac testing.. Thanks. The voltage comment is if my tps is adjusted like you say (same as I thought) press the gas a little and get a 51. Then let off the gas and 51 clears the TPS should be right.. If that is true, then my tps shows up at 0.62 @ idle. Now I have been trying...

Ok.. any ideas as to what connectors to jumper on the diag block.. Would It be like checking codes? IF so I can do that @lunch.. Just an FYI I do have the grey plug ECU and a brand new engine harness.. Really curious about the TPS possibility. Not sure if that is adj correctly or not. I...

Any Idea what connections I would need to check on the ECU?

My car idles around 650rpm and when I turn my AC on it drops to 500 or just below. Almost shuts off. When I have to stop as soon as I push in the clutch the car will idle to loww and shut off. What would cause the car not to Idle up when the AC is turned on?

Yo.. I forgot to tell you last night that I have a 88 N/A parts car in my garage..

Now that helps!! Thanks... I will give it a shot...

Personally I would get it from Dr Jonez.. They are referring to the lambda cable so I am guessing that is the innovate WB. I would find out.. If it is that is a pretty good price. Also Dr J sells both. Check with him on pricing..

I would agree.. This unit kicks A$$. I know nothing about tuning. (Why I have the issue) but I want to learn.. After these mods the car sounds and feels great. I am going to have to record an in car video and post it up!!

Well I am up and running and man it feels GREAT!!! Has been down a couple of months and now I am on the road again.. I LOVE THIS CAR!!! I do have a quick ?? on the tune.. My idle AFR is right at 14.7 :icon_bigg when i rev it my AFR's go to 10 or so and blows the black cloud.. How...

87na if you haven't purchased suspension parts yet, do some research. Black87 and I have similar setups different manufacturers though.. There is some good info on diff combo of springs and shocks. Let us know if you need help.. Don't worry about looks to much right now.. Unless you like the...

Getting to a time crunch here. I have searched here, full throttle and MKIIItech. I have found some good info but here is my question. My car is running with MAFT Pro:icon_bigg However it is idling a little rich (afr 12), the rpm's are around 600-650 but there is a little pop happening...

Nice.. Do you know Val over at Toyota?? I almost have mine finished.. We need to get a showing at BJ's.. Let me know when you start the swap I might be able to help a bit..