Search results

  1. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    will check throttle plate. I have an 89 + tb with no adjustment screw.
  2. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    yes, per tsrm with ohm meter and feeler gage. and its new. I get a code 51 when i tap on the gas idle contacts are good. also the tems engage with WOT
  3. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    Exactly, I just misunderstood you. I did look at the linkage, and its not keeping the tb open.
  4. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    I can move the cps up and down with t1 and e1 jumped and rpms fluctuate when i do this but it still doesn't get to 650 rpms. The tb screw is not a factor as i have an 89+ tb and its not on there ( I meant to mention that in the first post). Ian I have thought about the tb blade (I looked...
  5. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    I plugged them all at the same time, trying to choke the motor down but it didnt die. The leak is on the manifold itself as I have isolated all hoses and connections outside of the intake manifold out of the picture. ---------- Post added at 03:36 PM ---------- Previous post was at 03:33 PM...
  6. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    Yes sir it is but as stated above I plugged ALL ports to the intake manifold, every single one, trying to choke it to death and it wouldnt die....
  7. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    I did this with almost a half a can and could not hear the idle increase.... :(
  8. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    Cant set timing (correctly) until I fix the vacuum leak.... the cps is inserted correctly with the crank at 0 and cams at 0 but i cant set timing to 10° btdc until it idles at 650
  9. 7thousandpiecesMGTE

    Pirate air leak (Arrgggggg)

    setup: fully rebuilt 7m, t61 turbo, stock 440cc injectors, afpr, walbro, 6 lbs of boost, 2.5" hardpipes, spearco replica, custom intake pipe, external wastegate, open dump tube, 3" back. Car has been running with a very high idle, did some break in runs and drove it for a bit to try and...
  10. 7thousandpiecesMGTE

    Drag MK3 (Denmark DHB winner)

    Pretty nice..... http://www.youtube.com/watch?v=C30ip4L3Opo&NR=1
  11. 7thousandpiecesMGTE

    7mgte trouble revving, code 11

    Where should it be if 11 is too low? Running stock afm with stock injectors. Will check cam timing.
  12. 7thousandpiecesMGTE

    7mgte trouble revving, code 11

    aftermarket custom downpipe, no cat, to a raptor racing exhaust system. Unless a rat climbed in there....but I dont think that is the issue :) , i can always unhook the exhaust and see if that changes anything. Mod list is a bit off, I am on stock injectors for the break in and t4 turbo with...
  13. 7thousandpiecesMGTE

    7mgte trouble revving, code 11

    We are back on the original ecu as I don’t think this is ecu related. Possibly wiring issue... The code 24 may have been due to unplugging the afm (but could be a valid issue). I think the last time we pulled codes today it was normal with no codes (even after running). I can get the 51...
  14. 7thousandpiecesMGTE

    7mgte trouble revving, code 11

    Fresh build. Starts fine, idles great(no surging, sputtering). Give it throttle it bogs and then recovers, but doesnt rev freely. It acts like afm or tps. Uplug either one, idle changes slightly but still bogs with gas. replaced both the tps and afm, still no dice. mods are afpr, t4 turbo...
  15. 7thousandpiecesMGTE

    How do you like these wheels

    i like the trailer wheels..... :) the enkeis are ok, not to my taste, but its not my car either ;)
  16. 7thousandpiecesMGTE

    R154 W58 trans crossmember bracket mount (rear engine mount) questions....

    I am having trouble getting my trans to line up correctly so I want to make 100% sure I have the right bracket / crossmember / mount rear engine mount (whatever the hell the correct term is for it) I have searched my ass off but cant find a picture showing it installed. EDIT...
  17. 7thousandpiecesMGTE

    Happy Memorial Day

    Its often easily forgotten why we have this day off every year.... I too would like to thank our Servicemen and Women of the past, present, and future. We are forever in your debt and will never forget.
  18. 7thousandpiecesMGTE

    Philly Supra Meet 2010!! Sunday May 30th

    I know I will be shunned...but I am not going to be able make this meet, too much to do too little time. Sorry guys! next one for sure, its almost running.... I might shoot for the big toyota east coast meet in early june, will any philly supras make it to this?
  19. 7thousandpiecesMGTE

    Have aliens hijacked Voyager 2 ?

    Either that or they DID update to Interspace Explorer 8.0 and it just keeps crashing ...
  20. 7thousandpiecesMGTE

    Have aliens hijacked Voyager 2 ?

    ^^^^ This ^^^^^: http://news.discovery.com/space/nasa-finds-cause-of-voyager-glitch.html but maybe the aliens were just testing.... now they will reprogram it and send an alien death virus which can be caught by humans.....:sarcasm: