Search results

Ebay garbage...stay away Whasian

Yea, of course I did it right. I bought a new knock sensor repait kit from champion (I still have the part numbers if you want them) and soldered the repair kit to the wires inside the usb, then grounded the shielding. I heard awhile back that guys were doing this with co-axle cable (the stuff...

another note, I used usb wire for the sensor wire. I wired directly from the ecu to the knock sensor. It works really well. Whasian

Guys I am so sorry for belling out like I did. There was so much that started happening with me so I had to cut somethings out of my life for a bit. But I am back and want to get this stuffback rolling. Linc, I appologize to you for not helping you complete the website. ken and I will be...

Thanks to everyone for the advice...(including the small disagreement about the head bolts) I have check everything that everyone said and found nothing wrong any of those things. However I did find the problem and it was an easy fix. the 90 degree hose that comes off the union bolt on the...

+1 All of the supra owners in Northern California with 7m's and the few 7m owners here in Houston are setting the torque between 85 and 90 ft/lbs. Whasian

Sorry, The head and block were also in great shape and were resurfaced. I used the grease that came with the head bolts for lube and no rivets were touching the surface of the block or head. Whasian

yes, the radiator, the cap, and the thermostat are all good. The heater works great, a lot of heat come out of it and the temp guage never moves from the right spot. the reason I am filling the resevoir is becuase the light is coming on and it it low. whasian

Ok, I just finished a rebuild after a bhg, Everything changed. Every hose and every gasket is new. I have a mhg with arp hb torqued to 89 ftlbs. The car is boosting normaly (but there is a crack in the downpipe so I have a new one coming in on friday) I first put water in the car to make...

Because the plug on the mk4 sensor is a tighter fit. I always broke my 7m sensors, but never broke the mk4 sensor. and I think the jz sensor wire is bigger. Whasian

It should pull right off. Try tilting the H/B up and down. But be careful not to break anything off that balancer, it is weighted. Whasian

When I have a problem getting the oil filter off, reguardless if its' my supra or something else, I use the largest pair of channel locks I can, and I squeeze the channel locks down and twist at the same time. I have never had it fail. Whasian

The jz knock sensor and the 7m knock sensor are interchangable. But you need to wire in the jz plug in order to use them. I just finished wiring them into my harness and everything. I will post you a picture to you can see it better. Whasian

What is the name of the machine shop there. How ever told you that has some real issues. What part of northern cali do you live in. I lived near sacramento for a long time. I have a couple of choice machine shops I always went to. Whasian

What modifications need to be done to make the manifold fit? Different brake booster? Crushing the boster slightly? Whasian

Yea, I got the part about cutting the center of the tps...Is there anyway you can load a picture with the piece you fabricated on here with it being proper size? I wanna try and make a template off the computer and trace a peice out on a sheet I have. Whasian * Does the TPS have both fins...

is the only thing that you made the small plate that you placed on the throttle body? Whasian

I tried messaging him, but I haven't gotten any reply. I wanna know if he can make me a kit. If anyone can contact him please message me. Whasian

I like the idea of converting the throttle body to fit my supra tps..I am trying to contact the person who actually make these parts becuase I wanna see if he will make some for me. I am will to pay good money for them...Anyone know who this person might be? Whasian

Wheres the link so I can see what it looks like Whasian