Search results

Well I think its about 1" longer or so. It will fill the gap I have. Never hurts to try new things I guess. Lol

I have the r154 driveshaft, but it does not go all the way on. I want to use the front shaft from my w58 driveshaft and switch the splines so it fills up the gap.

Well how about putting the spline from the turbo drive shaft, on to the front half of the non-turbo driveshaft to make up for the gap?

Thanks for the help guys. I went and picked up an 89 crossmember off a r154. Its just toyota told me the cross member from 86-88 worked on both turbo and non-turbo.. and the 89-92 was different and worked on the turbo and non-turbo.. So I guess we will see if this one works. Also.. The...

Is it possible that there is only one set of holes made for it to bolt up with the w58 on my pre-89 n/a?

I swapped in a R154 into my 87 non turbo supra when i did my turbo swap.. but the bolts on the transmission crossmember dont line up to the stock holes? The mechanic that did the swap modified it to fit.. but there is a really bad vibration now and I think this is the problem. Is there...

OK so I have searched, but so far I have been unable to find someone with the exact problem as me. The car is an 86.5.. it went from an N/a 5spd to a JDM 7mgte 5spd.. It has the USDM wiring harness, the USDM ecu and gauge cluster (all out of an 87 turbo supra) Alright, so at first.. The...

He checked out the engine for me. A shop is doing my swap. Turns out its the oil feed on the turbo mixed with some power steering fluid too. Any ideas on the fuse problem? Thanks

Didnt find exactly what I was looking for with the search, sorry if it has been answered. Alright.. So my car is so close to being done.. It just had a JDM 7mgte swap. The turbo ecu and gauge cluster were put in the car also. Mhg and arp studs, changed the gasket on the turbo because it was...

Ive beaten 3 RSX's.. one was a type S. One RSX i pulled 3 car lengths.. and he was with his girlfriend :) Another RSX i got by about 2 to 2 1/2 legths. And i believed i beat the RSX-S.. i was reving it pretty high.. and it was from a dig.. i launched and spun about 10 feet and pulled about a...

I raced my friends Rs i believe, stock 140hp 126lb ft torque... he has a light weight flywheel, intake, exhaust with no cat, racing clutch... it wasnt a real good race, cuz he was already pulling up to me when i floored it.. from about 40km/h.. about 70 i wasnt gaining or loosing, but once i hit...