Widebody: S2 front fenders and Kaze Aerocraft rear fenders (Shineautoproject Replica)

[rodel]

Check it out! The rear fenders are already available for purchase. The front fenders are in the process of being replicated (a group buy is in progress, linked below).

http://www.supramania.com/forums/sh...ide-Body-Fenders-by-Shineautoproject-Free-100!

For reference, the wheels on the car are 8" wide with a +8 offset

 

[mytmk3]

This is going to be great! Thanks for the update rodel

 

[hvyman]

Damn arts car look sick.

IS the hole in the front fenders going to stay like that or are they going to be gone?

 

[rodel]

Damn arts car look sick.

IS the hole in the front fenders going to stay like that or are they going to be gone?

The hole will be gone

---------- Post added at 02:47 AM ---------- Previous post was at 02:46 AM ----------

This is going to be great! Thanks for the update rodel

You're welcome.

 

[Blackdawg]

love the fronts!

can't wait to see how the rear turn out

 

[te72]

Only thing I'm concerned about Rodel, is where the fenders meet the bumper on the sides there. Is that going to transition smoother, or is that just up to us to figure out?

 

[joel903]

Yes my thoughts extactly. Everything is nice, except where the side mouldings meets the body parts that aren't widebodied then it looks bad

Only thing I'm concerned about Rodel, is where the fenders meet the bumper on the sides there. Is that going to transition smoother, or is that just up to us to figure out?

 

[rodel]

Only thing I'm concerned about Rodel, is where the fenders meet the bumper on the sides there. Is that going to transition smoother, or is that just up to us to figure out?

It'll be important for the installer to figure out a solution. Here are possibilities:

Autostyle side skirts
Regulus side skirts
Kaminari Side Skirts

The side skirts would have to be widened.

 

[mytmk3]

From what I have read front plus rear bumpers can be stretched should be easy for my bomex front because I actualy had to force mine while bolting it in to sit in for the stock guards like it was always ment for widebody

As for where it meets at the sides for the kaze rear it was designed to work with the ugly behemoth of a creation kaze side skirts

So I am going to use regulus sides on mine to help fill that gap I'm sure some other kind of blending will still be needed but this should make it easier also karmani skirts go up at the sides also I belive Thats what the guy runs on the white one in the group buy section with the gt wing

Then the cherry widebody has some from Germany can't remember the name

I'm sure with body work you can get any sides to work with it but something that comes up to meet the kaze rear will just be easier with a set that goes up the sides

Edit: rodel just bet me with a less waffling to the point answer

 

[rodel]

Edit: rodel just bet me with a less waffling to the point answer

lol. Yes. Only if u ready my response prior to composing your essay.

 

[Blackdawg]

sorry i am confused..whats the issue??

 

[hvyman]

The rear molding stick out farther then the orig body below. Need to come up with something to fix it and make the rest of the body flow with the new add on.

 

[RPSil13]

The rear molding stick out farther then the orig body below. Need to come up with something to fix it and make the rest of the body flow with the new add on.

in the pics we just mocked it up w/ tape, once installed properly it wont be as dramatic

 

[Blackdawg]

The rear molding stick out farther then the orig body below. Need to come up with something to fix it and make the rest of the body flow with the new add on.

ah okay.

well im sure it'll turn out great..

 

[te72]

I was more referring to the front bumper, where it meets the *front* of the front fenders, but it can be worked out, I was just wondering. Looks great though, especially on a white car, I'm digging it!

 

[Poodles]

I was more referring to the front bumper, where it meets the *front* of the front fenders, but it can be worked out, I was just wondering. Looks great though, especially on a white car, I'm digging it!

That's why the S2 front lip has side pieces that come up to fill that.

 

[rodel]

An example of the S2 fenders, oem bumper, and S2 lip being executed. (S2 air guide and S2 rear fenders, as well.)

 

[Blackdawg]

damn thats hot

 

[rodel]

If there is enough interest to justfiy a group buy, perhaps I could get Shine to replicate the Kaminari sides.

 

[USPturbo89]

Damn rodel, another group buy for these puppies?? lol Id love to get in on this!!! maybe this time i can actually afford em... lol So, with the sideskirts that you have on your mkiii, would they flow well? Ya catch me??